Overview
The Smittybilt Sure Step 3-inch Diameter Side Bars in Black (part number DN230-S4B) are a pair of side bars with four step pads for older Dodge Ram trucks. They fit the 1995 to 2001 Dodge Ram 1500 in the Base, Laramie, ST, Sport and WS versions, and the 1995 to 2002 Dodge Ram 2500 and 3500 in the Base version.
Each pad is non-slip polyester, held by five pins set into a squashed step, so no metal is exposed to rust. The frame and body mount is rugged, and an oversize bolt attachment keeps the tube step from bouncing. The black powder coat finish covers the bars, mounting hardware is included, and most applications are no-drill.
Key features
- Sold as a pair
- 3-inch diameter side bars
- Four step pads
- Non-slip polyester step pads
- No-drill installation on most applications
- Black powder coat
Older Ram frames and rust
Older Dodge trucks often have frames and body mounts that have seen years of road salt. Before installing side bars, look at the mounting areas for surface rust, bent brackets or soft spots in the metal. Clean and treat any rust before bolting anything on, since a corroded mount can fail under a rider’s weight.
Powder coat chips easily when fasteners rub the finish, so touch up exposed spots with matching paint or a rust inhibitor. A pair of bars should sit level and at the same height on both sides of the cab, so measure before fully tightening the bolts. Re-check the hardware after the first several drives and after any rough trail use.
- Rust check at mount points
- Touch up chips in the finish
- Level and matched height
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | DN230-S4B |
| Tube | 3-inch diameter |
| Step pads | 4, non-slip polyester |
| Finish | Black powder coat |
| Sold | As a pair |
| Installation | No-drill on most applications; mounting hardware included |
| Fitment type | Direct fit |
Vehicle fitment
The side bars fit the 1995 to 2001 Dodge Ram 1500 in the Base, Laramie, ST, Sport and WS versions, and the 1995 to 2002 Dodge Ram 2500 and 3500 in the Base version.
Ram years after 2002 and the 2003 to 2008 Ram models are not covered by these bars. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Most applications need no drilling, but confirm the frame and body mount on your truck before installing the bars.
What’s included
A pair of 3-inch Sure Step side bars in black, with four step pads and mounting hardware.










