Overview
The Smittybilt Slant Back Tire Mount, part number 76857-05, moves a spare tire into an aggressive 45-degree pre-runner position on Smittybilt’s XRC/SRC Gen2 or Pivot HD tire carrier. It is built from 3/16-inch cold-rolled steel with a two-stage matte black finish.
The slant position keeps spare tires clear of the Cargo Restraint System and the JK Bowless Tops, so the mount works with either. Upright carriers are the usual setup, and the slant position suits off-road use when the hard top comes off.
Key features
- Converts between straight and slant configurations
- Accommodates tires up to 37 inches
- Rotopax gas or water can mount
- Off-road jack mount
- Works with Smittybilt Bowless Tops
- Two-stage matte black finish on 3/16-inch steel
Carrying a spare off-road
A spare tire mounted on the back of a Jeep moves weight away from the axle and changes how the vehicle balances on uneven ground. Keeping the tire close to the body and secure makes a difference on climbs and side slopes, and it keeps the spare from swinging when the vehicle bounces.
Slant positions are often chosen to keep the rear of the vehicle clear for accessories or hard top removal. Before changing the setup, check tire clearance against the tailgate, the hatch seals and any roof or cargo gear. Make sure the spare can be removed and reinstalled without strain, since heavy tires are easier to handle with a helper.
Accessories such as fuel cans and jacks add weight and need secure brackets. Strap them firmly, check mounting bolts after rough trips and keep the spare inflated to the right pressure for the road you are driving.
- Check bolts after rough trips
- Confirm tailgate and hatch clearance
- Secure fuel cans and jacks firmly
- Keep the spare inflated and ready
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76857-05 |
| UPC | 631410131956 |
| Material | 3/16-inch cold-rolled steel |
| Finish | Two-stage matte black |
| Maximum tire size | 37 inches |
| Configuration | Convertible between straight and slant |
| Compatible carriers | XRC/SRC Gen2 Tire Carrier or Pivot HD Tire Carrier |
| Accessory mounts | Rotopax gas or water can, off-road jack |
Vehicle fitment
The mount is universal fit and attaches to the XRC/SRC Gen2 or Pivot HD tire carrier named above.
Confirm the carrier and spare tire size for your vehicle before ordering.
Installation notes
Choose straight or slant before you mount the carrier, because the mount converts between the two. The mount accommodates tires up to 37 inches, so measure the diameter of your spare before installing it.
What’s included
Check the package contents against your installation before starting.
Not included: the tire carrier, which must be a Smittybilt XRC/SRC Gen2 or Pivot HD carrier for the mount to attach to.






















