Overview
The Bestop HighRock 4×4 Oversize Tire Carrier, part number 61960-01, is a black powder-coated steel carrier for Jeep Wrangler models. It combines a tailgate mount with the capacity to hold a large tire, and it fits 1997–2006 TJ, 2004–2006 LJ and 1987–1995 YJ models.
The carrier holds a tire up to 35 inches and weighing approximately 200 pounds. It swings away with the tailgate, so the rear of the Jeep stays accessible.
Key features
- Heavy tubular steel construction, black powder coated for corrosion resistance.
- Carrier and tailgate open and close as a single unit.
- Adjustable arm is designed to eliminate tailgate sag.
- Mounts to the body with backing plates.
Tire weight and swing-away use
A swing-away carrier shifts the weight of a spare tire to the rear of the Jeep, which changes handling on uneven ground and affects how the rear suspension and tailgate hinges carry load. Tire weight matters most when the Jeep is loaded and parked on a slope, so keep the carrier’s rated limits in mind when planning trips.
Mounting to the body with backing plates puts stress on the body panels, so inspect the mounting points for cracks or looseness after rough trails. Check the adjustable arm for sag over time, and touch up powder-coat chips where stones have exposed the steel.
- Recheck mounting bolts after the first few drives
- Keep the tire inflated for a steady load
- Touch up chips in the black powder coat promptly
- Inspect the adjustable arm before long trips
Specifications
| Brand | Bestop |
|---|---|
| Part number | 61960-01 |
| UPC | 7784801989 |
| Material | Heavy tubular steel |
| Finish | Black powder coat |
| Mounting location | Bumper mount with backing plates. |
| Maximum tire size | 35 inch |
| Maximum tire weight | About 200 pounds |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ), 2004–2006 Jeep Wrangler Unlimited (LJ) and 1987–1995 Jeep Wrangler (YJ), in the trims named above.
Not covered: 2007–2018 Wrangler JK models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier mounts to the body with backing plates, so it is not a bolt-on accessory that needs no body work. Set the adjustable arm so the tailgate closes without sagging, and check the tire is within the 35 inch and 200 lb limits.
What’s included
The carrier and its backing plates make up the kit; confirm any other hardware needed before starting.









