Select your vehicle

Smittybilt Defender Rack Light Cage – 50002

Smittybilt

Shop Smittybilt Roof Racks on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Light cage for four 9-inch diameter lights
  • Made from 16-gauge, fully welded 1-inch round steel tubing
  • Black powder coat finish
  • Bolts directly to the Smittybilt Defender roof rack

Description

Overview

The Smittybilt Defender Rack Light Cage, part 50002, is a black powder coat cage for four 9-inch diameter lights. It is made from 16-gauge, fully welded 1-inch round steel tubing and bolts directly to the Smittybilt Defender roof rack.

The cage matches the tubing of the Defender rack. Lights and wiring are not included.

Key features

  • Fully welded 16-gauge, 1-inch round steel tubing
  • Protects four 9-inch diameter lights
  • Textured black powder coat finish
  • Bolts directly to the Defender roof rack

Mounting lights on a roof cage

A roof light cage holds lights above the windshield line, where they throw light forward over the hood and into the trail. Light placement affects both beam height and how much glare reaches oncoming traffic, so aim each lamp before final tightening and recheck the aim after the vehicle has been on rough ground.

Wiring needs as much planning as the lights themselves. Route the harness along the cage tubing with clamps, keep it clear of sharp edges and moving parts, and leave some slack at each connector so vibration does not pull it loose. A fused connection close to the battery is standard practice for auxiliary lights.

Roof loads add weight high on the vehicle, so consider how the cage and lights will affect handling and the roof rack’s capacity. Check the bolts after rough trails, since vibration can loosen fasteners and shift the lights out of alignment. Keep the powder coat intact to limit rust at the welds.

  • Aim each light before final tightening
  • Clamp wiring along the cage tubing
  • Recheck bolts after rough trail use

Specifications

Brand Smittybilt
Part number 50002
UPC 631410115246
Type Roof-mounted light cage
Material 16-gauge, fully welded 1-inch round steel tubing
Light capacity Four 9-inch diameter lights
Finish Textured black powder coat

Vehicle fitment

The cage is built for the Smittybilt Defender roof rack. Confirm that your rack is a Defender roof rack before ordering, and check the mounting points before installing.

What’s included

The cage is sold alone. Lights and wiring are not included.

SKU: S/B50002 Category:

Specification

Shipping weight 19.00 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Questions & Answers

Will this cage hold four 9-inch lights?

Yes. It is designed to protect four 9-inch diameter lights, and it is made from 16-gauge steel tubing for that purpose.

Does the cage mount to a Defender roof rack?

Yes. It bolts directly to the Smittybilt Defender roof rack with no separate mounting brackets. Confirm the rack matches your vehicle before ordering.

Are lights and wiring included?

No. Lights and wiring are not included with the cage and must be purchased separately. The cage is made to hold four 9-inch diameter lights once they are fitted.

How should wiring be routed on a roof cage?

Secure the harness to the cage tubing with clamps, keep it away from moving parts and sharp edges, and leave a little slack at each light so vibration does not pull connectors loose.

Should a roof light cage be checked after rough trails?

Yes. Check the bolts, lights and wiring after rough use, since vibration can loosen fasteners and move the lights out of alignment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Smittybilt Roof Racks on Amazon