Overview
The Smittybilt Defender Rack Light Cage, part 40002, is a welded steel cage that holds four 9-inch diameter lights and bolts to the Smittybilt Defender roof rack. It is made from 16-gauge, 1-inch round steel tubing to match the rack.
The cage protects the lights from impact. Lights and wiring are not included, so they must be bought separately.
Key features
- Fully welded 16-gauge, 1-inch round steel tubing
- Protects four 9-inch diameter lights
- Textured black powder coat finish
- Bolts directly to the Defender roof rack
Choosing and mounting roof lights
Roof-mounted lights throw light far down the trail, but they also add height and wind load. Position the cage so the beams aim where you need them and do not blind other drivers. Heavier lights place more stress on the rack, so mount the cage on the strongest points of the rack and keep the load spread evenly across the bars.
Light choice affects the cage as much as the mounting. Round lights of the diameter the cage holds sit most securely, and their wiring should be routed along the rack bars with clamps so it does not chafe or snag branches. A switch within easy reach of the driver makes using the lights simpler. Check the welds and bolts after rough trips, and touch up the powder coat where stones have chipped it to slow rust.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 40002 |
| UPC | 631410115222 |
| Type | Roof-mounted light cage |
| Material | 16-gauge, fully welded 1-inch round steel tubing |
| Light capacity | Four 9-inch diameter lights |
| Finish | Textured black powder coat |
| Mounting location | Roof |
Vehicle fitment
The cage is built to bolt onto the Smittybilt Defender roof rack. No vehicle year or model is stated, so check the rack’s manufacturer specifications for your vehicle.
What’s included
The cage is sold alone. Lights and wiring are not included.









