Overview
The Smittybilt Defender is a welded one piece roof rack, part number 45654, and is a steel cargo basket rack measuring 4.5 wide by 6.5 long, with 4-inch sides. It is designed for universal application, but it needs a vehicle-specific mounting kit, which is sold separately.
The rack is made from 16-gauge, fully welded 1 inch round steel tubing with a textured black powder coat. Its welded light tabs, four in front and two in back, and integrated flooring add to its use, and it has eight mounting points.
The aerodynamic styling suits today’s vehicle designs, and the welded construction is designed for long-term use.
Key features
- Fully welded 16-gauge steel frame of 1 inch round tubing
- Textured black powder coat finish
- Welded light tabs: 4 front and 2 rear
- Integrated flooring
- Eight mounting points
- Aerodynamic design
Using a roof basket safely
A roof basket adds cargo height, which changes how the vehicle handles in wind and on corners. Load heavier items low in the basket and keep them centered, and secure everything with straps that are rated for the load. Loose gear can shift in a sudden stop, so check the tie-downs at the start of each trip and after the first few miles.
Choosing a rack starts with the mounting kit. The basket itself needs the right kit to attach securely, so the kit should be matched to your roof type before anything is bolted on. Consider the lights mounted in the front and rear tabs, the flooring, and how you will reach items. Steel racks are heavy, so plan for the extra weight on the roof.
- Center heavy items and keep them low
- Tighten mounting hardware after the first drive
- Check straps for fraying before each trip
- Keep roof weight within the vehicle’s rating
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 45654 |
| UPC | 631410114577 |
| Type | Cargo basket roof rack |
| Construction | Fully welded steel, 16-gauge |
| Tubing | 1 inch round |
| Size | 4.5 wide x 6.5 long, 4-inch sides |
| Finish | Textured black powder coat |
| Mounting points | 8 |
| Drilling | Not required |
| Mounting system | Sold separately, vehicle-specific |
Vehicle fitment
The rack is designed for universal application with a direct fit. Mounting depends on the vehicle-specific kit, which decides which vehicles the rack can be fitted to. Match the kit to your year, model and trim before ordering.
The mounting kit is sold separately. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Buy the mounting kit for your vehicle before the rack, since the kit is vehicle-specific and sold separately. Drilling is not required.
What’s included
The welded rack. The vehicle-specific mounting kit is sold separately.









