Overview
The Smittybilt 76717 is an SRC roof rack for 4-door models, built from over-built 2 x .120 wall textured powder coat steel tubing. Heavy duty 1/4 brackets back the tubing, and the rack is designed to carry up to 300 pounds of evenly distributed cargo.
The cross bars are removable for easy soft top or hardtop removal, and they are designed to work with almost all aftermarket accessories, including Thule and Yakima racks. The four-point mounting attaches to the front door mounts and to the rear frame.
The contoured design is meant to avoid a boxy look. Confirm the rear bumper type before you order, since the rack is built around that mounting arrangement and will not fit every rear end. The rack works with the factory rear bumper or the SRC series rear bumpers, but not with rap around rear corner style bumpers.
Key features
- Removable cross bars for soft or hardtop removal
- Cross bars that take almost all aftermarket accessories
- Four-point mounting to the front door mounts and rear frame
- Contoured design
- Modular design that is easy to install
Rack loads and wind noise
A roof rack adds height and wind load, so the vehicle handles differently at highway speed than it does without one. Keep heavy items low and centered on the cross bars, and secure everything with straps that will not shift on rough trails. Loose gear can strike the windshield or the tubing, so check straps at every fuel stop.
Mounting points work loose from vibration, especially on washboard roads. Recheck the four mounting points after the first few drives and periodically afterward. Look for cracked welds on brackets, bent tubing, and chipped paint that exposes bare steel, since surface rust can spread under the powder coat. Cross bars removed for a soft top should be stored where they will not scratch the finish.
- Check strap tension after rough sections
- Inspect bracket welds for hairline cracks
- Store removed cross bars under cover
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76717 |
| UPC | 631410090376 |
| Product type | Roof rack |
| Body style | 4-door |
| Material | Steel tubing, 2 x .120 wall, textured powder coat |
| Brackets | 1/4 in. heavy duty |
| Load | 300 lb of evenly distributed cargo |
| Mounting | Four-point, with removable cross bars |
| Finish | Textured black |
| Drilling | Not required |
Vehicle fitment
It fits 4-door models. The rack works with the factory rear bumper or the SRC series rear bumpers. It does not fit the 2013 Rubicon 10th Anniversary Edition because of its factory supplied rear bumper. Confirm your rear bumper before ordering.
The rack will not work with rap around rear corner style bumpers. It also does not fit the 2013 Rubicon 10th Anniversary Edition because of its factory supplied rear bumper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bottom rear leg mounts are designed to bolt on without drilling, and only for aftermarket bumpers. Smittybilt says factory bumpers require drilling to install the rack.
What’s included
The removable cross bars and four-point mounting hardware are included. Check the package contents against your installation before starting.
































