Overview
The Smittybilt Defender welded one-piece roof rack, model 50704, is a cargo basket style rack built from 16-gauge, fully welded 1 inch round steel tubing. It measures 5 feet wide by 7 feet long with 4 inch sides and has a textured black powder coat finish.
The aerodynamic styling blends with current vehicle designs. The rack has welded light tabs, four at the front and two at the rear, and integrated flooring. Several mounting options are available, and a vehicle-specific mounting kit, sold separately, is required.
Key features
- 16-gauge steel with fully welded 1 inch round tubing
- Textured black powder coat finish
- Aerodynamic styling
- Welded light tabs: four front and two rear
- Integrated flooring for cargo
- Designed for long service life with its welded steel construction.
Mounting and load planning
A roof rack adds load on top of the vehicle, so the mounting points and the roof itself carry the weight in motion. Before fitting a steel basket like this, check the roof rail or gutter type, the crossbar spacing and the height limit for your garage and trails. Heavier steel adds weight high on the vehicle, which changes handling, so keep loads low and centered.
Painted surfaces around the mounts can chip during installation. Touch up bare spots with matching paint so rust does not start. Recheck every bolt after the first drive and again after rough roads, because vibration loosens hardware on any roof rack.
- Measure roof height before buying
- Keep heavy items low in the basket
- Inspect welds and mounts each season
Specifications
| Brand | Smittybilt |
|---|---|
| Model number | 50704 |
| UPC | 631410114591 |
| Style | Defender, one-piece welded roof rack, cargo basket |
| Size | 5 ft wide by 7 ft long, 4 in sides |
| Material | 16-gauge steel, 1 in round tubing |
| Finish | Textured black powder coat |
| Light tabs | 4 front, 2 rear |
| Drilling | No drilling is required. |
| Mounting | Vehicle-specific kit, sold separately |
Vehicle fitment
This rack is universal in application and needs a vehicle-specific mounting kit, sold separately, before it can be matched to a vehicle. Confirm the mounting kit suits your roof and vehicle before buying the rack.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting depends on the vehicle-specific kit, which is not included, so install the kit first and fit the rack to it. The welded light tabs are for mounting lights, and those lights are not included. Wire any roof lights through a fused relay circuit and check local rules on auxiliary lighting before using them on the road.
What’s included
The Defender roof rack, model 50704.
Not included: the vehicle-specific mounting kit and any lights for the light tabs.









