Overview
The Smittybilt 40204 is a fully welded one-piece Defender roof rack, measuring 4 ft. wide and 2 ft. long, with 4 in. sides. It is built from 16-gauge, 1 in. round steel tubing in a textured black powder coat.
The rack can be used with or without a factory rack, and a light cage is available as an option. Its welded light tabs (four at the front and two at the rear) and integrated flooring make it a usable cargo platform.
The rack suits a range of trucks and requires a vehicle-specific mounting kit. It fits the Ford Ranger from 1988 to 2011 and the Toyota Tacoma from 1995 to 2014. Drilling is required.
Key features
- Fully welded one-piece construction
- 16-gauge, 1 in. round steel tubing
- Usable with or without a factory rack
- Light cage optional
- Welded light tabs and aerodynamic styling
Using a welded roof rack
A one-piece welded rack has no joints to loosen, so the main inspection points are the welds, the tube walls and the mounting hardware. Look for cracks near weld seams after rough trips, and check for rust where the powder coat has chipped. The light tabs should also be checked for secure wiring.
When a factory rack is already on the roof, decide whether the new rack will sit on top of it or replace it. Clearance under the floor and the position of the light tabs both matter. Keep loads low, use tie-downs, and avoid stacking heavy gear on the sides, since the frame is meant to carry cargo on its floor.
- Inspect welds after rough trips
- Use tie-downs for every load
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 40204 |
| UPC | 631410114614 |
| Product type | Roof rack, cargo basket |
| Construction | Welded, one piece |
| Size | 4 ft. wide x 2 ft. long, 4 in. sides |
| Material | 16-gauge steel, 1 in. round tubing |
| Finish | Textured black powder coat |
| Light cage | Optional |
| Drilling | Required |
Vehicle fitment
It fits the 1988 to 2011 Ford Ranger and the 1995 to 2014 Toyota Tacoma. Other trucks outside those years and other Ford or Toyota models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required for this rack. Check the mounting points on the listed trucks before drilling, and confirm whether a factory rack is in place if you plan to mount over it.
What’s included
The welded one-piece rack is included. The light cage is an option, and the vehicle-specific mounting system is sold separately.
Not included: The light cage and the mounting system.




















