Overview
The Skyjacker JB40F is a track bar relocation bracket for the 1987–1995 Jeep Wrangler YJ. It is a front, axle-side bracket with a direct fit and a limited lifetime warranty. Track bars, also called Panhard bars, keep the axle centered side to side, and a relocation bracket changes where the bar attaches to the axle.
Key features
- Front placement with an axle-side type
- Direct fit design for the listed 1987–1995 Wrangler YJ trims
- Covered by a limited lifetime warranty
- Carries Skyjacker part number JB40F
Relocation brackets and axle centering
A relocation bracket moves the point where a track bar meets the axle, which changes the angle and sometimes the centering of the bar. Because the bar’s geometry depends on its mounting point, a bracket should be matched to the bar it works with and the axle it attaches to. Check that the bracket clears nearby parts before tightening anything.
Before installing, look at the axle bracket welds, mounting holes and fasteners for cracks or wear, especially on a vehicle that has seen hard off-road use. Confirm the bar length and centering after the bracket is in place, then check alignment. Relocated bars put more load on the axle mounts, so inspect them at each service.
- Check welds and mounting holes for cracks
- Confirm bar clearance after installation
- Recheck axle centering and alignment
- Inspect fasteners at routine service
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JB40F |
| UPC | 803696144382 |
| Position | Front |
| Type | Axle Side |
| Fitment | Direct Fit |
| Warranty | Limited lifetime warranty |
Vehicle fitment
Skyjacker’s manufacturer fitment list covers the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Later Wrangler generations, including the TJ, LJ and JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
This package is the track bar relocation bracket only.
Not included: The track bar itself and any mounting hardware may be needed. Check the package contents against your installation before starting.








