Overview
The Mountain Off Road Enterprises 9923 is a passenger side steering correction bracket for Jeep Wrangler YJ models from 1987 to 1995. It mounts on the passenger side steering knuckle and is made of bare steel. The bracket is for use with spring over axles.
It is used with kit 9930 and kit 9940. It is a track bar bracket that mounts at the axle side, and it is bolt-on once the knuckle has been drilled and tapped.
Steering correction on YJ axles
A steering correction bracket changes how the track bar and steering linkage attach at the knuckle, which helps when a spring over axle needs alignment work. On a YJ, the knuckle is the key mounting point, so getting the bracket position right affects steering feel and wheel alignment.
Look at the knuckle, arms and existing steering parts before deciding on a fabrication plan. Worn tie rod ends, loose kingpin components and bent parts should be replaced first, because a correction bracket cannot compensate for a worn joint.
Once installed, recheck toe and steering centering, then inspect the drilled area for cracks after the first few trips. Keep a record of the measurements so later repairs can be compared against the original setup.
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | 9923 |
| UPC | 815572020093 |
| Mounting location | Passenger side steering knuckle |
| Type | Axle side |
| Material | Bare steel |
| Axle type | Spring over axles |
Vehicle fitment
The manufacturer fitment list covers 1987 to 1995 Jeep Wrangler (YJ) models in several trims, including Base, Laredo, Renegade, Sahara and Sport.
Only the 1987 to 1995 YJ years are listed. TJ, LJ, JK and later Wrangler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires drilling and tapping of the passenger side steering knuckle. Plan your fasteners and procedure before starting, and work on the knuckle only with the vehicle safely supported.
What’s included
This bracket is sold on its own, with no hardware or instructions provided.
Not included: hardware, instructions, and kits 9930 and 9940, which this bracket is used with.







