Overview
The Tuff Country 61301 is a rear SX8000 shock absorber, a twin-tube, nitrogen gas charged shock for full-size trucks and SUVs. It suits 2 and 4-door models and is set up for a 2 in. lift. It is sold individually and has polyurethane bushings and a heavy-duty 5/8 inch piston rod.
Coverage runs from 1988 through 2015 and centers on Chevrolet and GMC K-series and Silverado and Sierra pickups, Dodge and Ram 2500 and 3500 trucks, Ford F-150, F-250 and F-350 models, the Excursion, and the Jeep Wrangler JK. Use the vehicle section below to confirm your exact year and model.
Key features
- Rear-position shock for the listed trucks and SUVs
- Nitrogen gas charge meant to limit fading
- Quicker shock response, per the manufacturer
- Heavy-duty 5/8 inch piston rod
- Polyurethane bushings
- Suits 2 and 4-door models
Rear shocks and axle balance
Rear shocks control axle movement under load and keep the tires in contact on uneven ground. Because the rear axle carries cargo and towing loads, the shock’s gas charge and valving have a bigger effect on stability than many owners expect. Rear shocks are also more exposed to mud and water, so keep the mounting area clean and check the bushings for splitting.
When replacing rear shocks, most owners change both sides of an axle together. Matching units keep the rear end from leaning or wandering on one side. Lift height affects rear suspension angles, so confirm the setup before fitting and check for rubbing on the driveline after the first drive.
- Replace both rear shocks on the same axle
- Clean mounting points before fitting
- Check for rubbing after the first drive
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 61301 |
| UPC | 10698815613019 |
| Series | SX8000 |
| Position | Rear |
| Design | Twin-tube, nitrogen gas charged |
| Piston rod | 5/8 inch, heavy duty |
| Bushings | Polyurethane |
| Fitment type | Direct fit |
| Lift height note | w/2 in. Lift |
| Sold as | Individually |
Vehicle fitment
Coverage runs from 1988 through 2015. Chevrolet fit includes the K1500, K2500 and K3500 from 1988 to 1998, the V30 in 1988 and V3500 from 1989 to 1991, the Silverado 1500 from 1999 to 2014, the Silverado 2500 HD from 2001 to 2015, and the Silverado 3500 HD from 2007 to 2015. GMC fit mirrors the K-series and includes the Sierra 1500 from 1999 to 2014, the Sierra 2500 HD from 2001 to 2014 and the Sierra 3500 HD from 2007 to 2015. Dodge and Ram fit covers the 2500 and 3500 from 1994 to 2010, the Ram 2500 from 2011 to 2013, the Ram 3500 from 2011 to 2012, and the Ram 1500 for 2011. Ford fit covers the Excursion from 2000 to 2005, the F-150 from 2004 to 2014, and the F-250 and F-350 Super Duty from 2005 to 2014. The Jeep fit is the Wrangler JK from 2007 to 2014.
The list does not include the Ford F-150 before 2004, the Jeep Wrangler TJ or LJ, or Ram 1500 models other than 2011. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift note reads w/2 in. Lift, so confirm your rear suspension height matches that setup before installing. Rear shocks are normally replaced as a matched pair on each axle, so plan quantities accordingly.
What’s included
One rear SX8000 shock absorber, sold individually.
Not included: Mounting hardware and a second shock are not included with this item.









