Overview
The Skyjacker Black Max B8518 is a rear shock absorber from the Black Max B8500 series, rated for a 0-3 inch lift range and fitted with a black boot. It is a twin tube hydraulic unit for the 1984-2001 Jeep Cherokee XJ, the 1997-2006 Jeep Wrangler TJ and the 2004-2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon.
The B8500 series uses a foam-cell design. As the oil heats and expands, the foam cell compresses, which helps damping stay steady across temperature changes. The same design allows the shock to be mounted in any direction, which helps when clearance around the rear axle is tight.
Key features
- Rear position with a stated 0-3 inch lift range
- Twin tube construction for hydraulic damping
- Vehicle-specific multi-stage valving
- Increased fluid capacity for heat dissipation under hard use
- Sintered iron piston and chrome plated shaft
- Black boot included and a limited lifetime warranty from Skyjacker
Lift range and shock length
A shock’s job is to control spring motion, and it works best when its travel and length match the height of the suspension. A 0-3 inch lift range suits modest lifts, where the rear springs are raised a little and the shock stays close to its original length. Larger lifts usually need longer shocks, since a short shock can run out of travel and bind at full extension.
Before buying, measure your current rear shock length with the vehicle at its installed height and compare it against the new unit. Worn bushings, bent mounts and damaged boots are also worth checking while the old shock is out, because they affect how the new shock performs. Off-road use with larger tires puts more load on the mounts, so inspect them after rough trips.
- Compare installed shock length with the new unit before ordering
- Replace worn mounting bushings during the swap
- Check the boot for tears that let grit into the shaft
- Recheck mount bolts after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | B8518 |
| UPC | 803696238487 |
| Product line | Black Max B8500 series |
| Shock series | Replacement |
| Position | Rear |
| Lift range | 0-3 inch lift |
| Construction | Twin tube |
| Piston | Sintered iron |
| Shaft | Chrome plated |
| Damping | Hydraulic |
| Boot | Black boot included |
| Warranty | Limited lifetime |
| Sold as | Individually |
Vehicle fitment
It fits the 1984 to 2001 Jeep Cherokee (XJ) in Base, Chief, Classic, Laredo, Limited, Pioneer and Sport trims. It also fits the 2004 to 2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997 to 2006 Jeep Wrangler (TJ) in Rubicon, Sahara, Sport, SE, X and 65th Anniversary Edition trims. Wrangler YJ, JK and JL models, Grand Cherokee and Liberty are outside its coverage. Confirm fit by year, model and trim before ordering.
The list does not include Wrangler YJ, JK or JL models, and it does not include Grand Cherokee or Liberty vehicles. The LJ entries are limited to Unlimited trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on jack stands before removing a rear shock, since the suspension should not rest on a jack alone.
What’s included
One Black Max B8518 rear shock with black boot. The shock is sold individually, so a pair requires two units.









