Overview
The Skyjacker DR74S is a rear Softride leaf spring for a 4 inch lift. It is a single spring with pre-installed rubber bushings and is made for use with 3 inch wide rear springs.
The spring is built from progressive multileaf packs in American steel and carries a limited lifetime warranty. Its fitment is Direct Fit for a 0 to 4.99 inch range.
Key features
- Progressive multileaf pack construction
- American steel leaves
- Rubber bushings pre-installed
- Set for a 4 inch lift
Matching width and lift
Rear spring width matters as much as lift. A spring that is wider or narrower than the existing pack can change where the spring sits on the axle seat and how the clamp holds it. Measure the current rear springs across the leaf width, not only the length, and compare that figure before deciding.
Lift height and width work together. A four inch lift raises the rear, which can change shock angle and driveline angle, so have the rear driveline checked after installation. Tighten the U-bolts after the first drives, and check that the spring sits square on the axle before the first trip.
- Measure leaf width at the spring pack
- Check shock length for the new height
- Inspect U-bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DR74S |
| UPC | 803696127651 |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Rubber bushings included |
| Lift height | 4 in |
| Lift height range (fitment table) | 0 to 4.99 in |
| Rear spring width | 3 in wide rear springs |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
The DR74S carries no vehicle years or models. Its fitment is recorded only as Direct Fit for a 0 to 4.99 inch range, while the lift is 4 inches, so match both before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spring is listed with 3 inch wide rear springs, so check the width of your existing rear springs first.
What’s included
One rear leaf spring with pre-installed rubber bushings.




