Overview
The Skyjacker FR52S is a single rear Softride leaf spring for a 0 to 4.99 inch lift. Two are needed for a pair. It fits Ford Bronco models from 1978 to 1996, F-100 from 1973 to 1976, F-150 from 1977 to 1996, F-250 from 1977 to 1998, the 1997 F-250 HD, and F-350 from 1979 to 1997.
The leaves form a progressive multileaf pack in American steel. Skyjacker says its load capacity equals or exceeds original equipment. The spring comes with rubber bushings already installed and carries a limited lifetime warranty.
Key features
- Rear position with a 0 to 4.99 inch lift range
- Progressive multileaf packs
- American steel construction
- Rubber bushings already installed
- Load capacity equal to or greater than OE
Rear spring care tips
Rear springs on older Ford trucks see steady use on rough roads and under cargo, so their condition shows up in how the truck rides and steers. Leaves that lose arch, a center bolt that has backed out, or a spring eye that has worn elongated all reduce control and should be inspected before they are driven on for long distances.
Pairing a new spring with worn shackles or bushings wastes much of the benefit. Check the hangers and shock mounts while the axle is supported, and replace any parts that move under hand pressure. Retorque the U-bolts after the first trail runs, and recheck them again after the next few weeks of normal driving.
- Check for sagging and uneven rear height
- Inspect the center bolt and leaf tips
- Replace worn shackles with the spring
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FR52S |
| UPC | 803696133584 |
| Product type | Softride leaf spring |
| Position | Rear |
| Spring quantity | Single spring (two per pair) |
| Lift height range | 0 to 4.99 inches |
| Bushings | Rubber, pre-installed |
| Construction | Progressive multileaf packs, American steel |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
The FR52S fits 1978–1996 Ford Bronco (Custom, Eddie Bauer, Northland, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport); 1973–1976 Ford F-100 (Base, Custom, Northland, Ranger, Ranger XLT); 1977–1996 Ford F-150 (Base, Custom, Eddie Bauer, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1977–1998 Ford F-250 (Base, Custom, Eddie Bauer, Lariat, Northland, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat); 1997 Ford F-250 HD (XL, XLT); and 1979–1997 Ford F-350 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat).
Covered model years for these trucks end in 1998. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rubber bushings are already installed, so no separate bushing order is needed. Support the axle before removing the old spring.
What’s included
One single rear leaf spring.
Not included: the second spring needed for a pair.





