Overview
The Skyjacker Softride Hydro Shock Absorber, part number H7056, is a hydraulic twin-tube shock absorber made for vehicles fitted with a suspension lift kit. It is the Softride Hydro model that Skyjacker pairs with most of its kits, offering a comfortable street ride that stays firm enough for most off-road driving.
The shock combines hydraulic action with multi-stage velocity sensitive valving and variable resistance. An oversize piston head, an internal rebound bumper and an expanded fluid reservoir are built in, and the reservoir helps keep performance consistent with less foaming. It works with suspension lift kits only and does not lift the vehicle.
Key features
- Multi-stage velocity sensitive valving
- Hydraulic action with variable resistance
- Oversize piston head and internal rebound bumper
- Expanded fluid reservoir to help reduce foaming
- Heavy-duty twin tube construction with a 5/8 in hardened double chrome rod
- Heavy-duty high mileage white paint with minimum 240-salt protection
- Limited lifetime warranty
Lift kit compatibility
A suspension lift changes the angle and working length of each shock, so the shock needs to suit the new ride height. Shocks that were fitted before the lift may be worn or set for the stock geometry, which can cause early bottoming and rapid bushing wear on the mounts.
When planning the job, confirm the lift kit is complete and compatible with the shock lengths before fitting. Hydraulic shocks with hardened rods resist pitting, but the seals still need checking after rough trail use. Keep the left and right units matched so damping feels the same on both sides.
- Confirm the lift kit parts are complete before removing the old shocks
- Check the upper and lower mounts for cracks or stretched holes
- Replace bump stops when the lift changes available travel
- Recheck the mounts after the first few trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7056 |
| UPC | 803696139296 |
| Product line | Softride Hydro |
| Shock type | Hydraulic, twin tube |
| Rod diameter | 5/8 in, hardened double chrome |
| Collapsed length | 14.54 in |
| Extended length | 24.75 in |
| Shock stroke | 10.21 in |
| Valving | Multi-stage velocity sensitive |
| Finish | Heavy-duty high mileage white paint |
| Corrosion protection | Minimum 240-salt protection |
| Bushings | Red polyurethane |
| Boot | Red |
| Warranty | Limited lifetime |
Vehicle fitment
It is designed for vehicles fitted with a suspension lift kit. Confirm fit for your vehicle’s year, make and model before ordering, and check the lift height against your installed suspension.
Confirm your vehicle’s year, model and trim before ordering. A stock vehicle without a suspension lift kit is not the intended application for this shock.
Installation notes
Because these shocks are designed to work with suspension lift kits, a lift kit must already be installed or be fitted as part of the same job. Check that the collapsed length of 14.54 in and extended length of 24.75 in suit your lift before installing. Support the vehicle securely with jack stands before removing any shock.
What’s included
One Skyjacker Softride Hydro shock absorber with red polyurethane bushings and a red boot. Shocks are supplied individually.
Not included: Suspension lift kit components. The shock does not lift the vehicle.







