Overview
The Rancho RS5304 is a rear-position RS5000 Series gas-charged shock absorber for the Nissan Titan. Rancho lists fitment for the 2004–2015 Titan in LE, PRO-4X, S, SE, SL, SV and XE trim.
It is rated for a w/4 in. Lift, which suits Titans running a lift. It uses ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston, and it is built for both on-road and off-road driving.
Key features
- Rear-position mounting for the Titan
- Rated for a w/4 in. Lift.
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Gas-charged body
- Red protective boot included
Choosing a lift-matched shock
A shock absorber controls how quickly the spring compresses and rebounds, which keeps the tires in contact with the ground over washboard, ruts and jumps. On a Titan, the rear shocks carry load that changes with the bed contents and any hitch or cargo, so the damping has to handle both light and heavy conditions. Velocity sensitive valving adjusts resistance based on how fast the shaft moves, letting slow body motion stay soft while sharp impacts are controlled.
When a truck is raised, shock length and travel change, and a shock built for the original height may bottom out or wear unevenly. Matching the shock to the lift height and the rest of the suspension, including springs, track bar and control arms, helps keep the geometry consistent. Replacing shocks in pairs on the same axle keeps damping balanced from side to side.
- Inspect for oil seepage down the body
- Check bushings and mounting hardware for wear
- Re-torque mounting bolts after the first few trail runs
- Replace shocks in pairs on the same axle
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5304 |
| UPC | 10039703530405 |
| Series | RS5000 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height rating | w/4 in. Lift |
| Valving | Ten-stage velocity sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Body | Gas charged |
Vehicle fitment
It fits the 2004–2015 Nissan Titan in LE, PRO-4X, S, SE, SL, SV and XE trims.
The list shows Titan models only and does not cover other Nissan trucks. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear-position RS5000 Series shock absorber with a red protective boot included.








