Overview
The Skyjacker M9571 is an M95 Performance monotube shock absorber for the front of light trucks, Jeeps and SUVs. It is a single-tube, gas-charged design built to run cooler under severe use.
It uses high-pressure nitrogen gas and a floating piston for quick response. It has a 46mm bore and is designed for lifts of 6 to 8 in., so compare that range with your suspension height before choosing it.
Key features
- Gas-charged monotube construction with a 46mm bore
- Internal bump stop
- Directional mounting at 180 degrees
- Front position
- Direct fit design
- Designed for lifts of 6 to 8 in.
Matching the shock to your build
A monotube shock keeps its gas charge and working oil in a single tube, which helps it manage heat during long descents and repeated hard use. On the trail, that matters when a loaded vehicle works through rough terrain for an extended stretch. Damping also depends on the rest of the suspension, so springs, bushings and steering components should be in good shape before the shock is judged.
When matching a front shock to a build, start with lift height and axle position, then think about how the vehicle is driven. Front units carry steering loads, so worn tie rod ends or ball joints can make a new shock feel wrong. Replacing soft or cracked mounting bushings at the same time keeps the setup consistent.
- Inspect the bump stop and rubber mounts for cracks
- Look for oil seepage around the shaft seal
- Re-check mounting bolts after the first few trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9571 |
| UPC | 803696212364 |
| Shock series | M95 Performance |
| Shock type | Monotube, gas charged |
| Position | Front |
| Bore size | 46mm |
| Mounting | Directional, 180 degrees |
| Lift height | 6 to 8 in. |
| Fitment | Direct fit |
| Sold as | Each |
Vehicle fitment
It is a direct fit design. Check the front axle and suspension height against this shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock is directional, set its orientation to the 180 degree mounting. Gas-charged units hold pressure, so handle them with care during removal.
What’s included
One Skyjacker M9571 shock absorber, sold as each.
Not included: Confirm which brackets and hardware your installation needs before starting.









