Overview
The Skyjacker M95 Performance Monotube Shock Absorber, part number M9516, is a front gas-charged monotube shock for Jeep and light truck suspensions with 0 to 3 in of lift. It fits the 1984 to 2001 Jeep Cherokee XJ, 1986 to 1992 Jeep Comanche, 1993 to 1998 Jeep Grand Cherokee ZJ, 1999 to 2004 Jeep Grand Cherokee WJ, 1997 to 2005 Jeep Wrangler TJ and 2004 to 2005 Jeep Wrangler LJ.
A monotube shock uses one main tube, with a floating piston separating the oil from pressurized gas. The single tube design helps operating temperatures stay cooler under extreme conditions, and the high pressure nitrogen gas and floating piston work together for quick response. Because the M9516 is a front unit, check its position and 0 to 3 in lift range against the shock you are replacing.
Key features
- Monotube body that Skyjacker says runs cooler under extreme conditions
- High pressure nitrogen gas charge with a floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Lift range of 0 to 3 in
- Shock boot included
Ride height and lift range
Lift range affects how much suspension travel a front shock uses. When the front end is raised, the shock sits at a different length at rest, so the mounting points and damping should suit the height of the suspension. Ride feel changes with the shock, the spring rate and tire size together.
Worn shocks that have lost damping let the front end bounce after dips and wash out on washboard roads. Replacing a worn front shock often restores control, but a lifted vehicle may also need upgraded control arms or bump stops to keep the geometry in check. Check steering play after installing new shocks.
- Inspect both front shocks at the same time
- Recheck mounting bolts after the first few drives
- Look for leaks, dents in the body and worn bushings
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9516 |
| UPC | 803696211503 |
| Shock series | M95 Performance |
| Position | Front |
| Construction | Gas monotube |
| Charge | Gas charged, high pressure nitrogen |
| Bore | 46mm |
| Mounting | 180 degree directional |
| Bump stop | Internal |
| Lift height | 0 to 3 in |
| Included | Shock boot |
| Sold as | Each |
Vehicle fitment
It fits 1984 to 2001 Jeep Cherokee (XJ), 1986 to 1992 Jeep Comanche, 1993 to 1998 Jeep Grand Cherokee (ZJ), 1999 to 2004 Jeep Grand Cherokee (WJ), 1997 to 2005 Jeep Wrangler (TJ) and 2004 to 2005 Jeep Wrangler (LJ). Trims range from Base and Sport to Limited and Rubicon, depending on the model. Match your year, model and trim to these entries before ordering.
The list does not include the 1987 to 1995 Wrangler (YJ), the 2007 to 2018 Wrangler (JK), or any 2006 Wrangler LJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the mounting is 180 degree directional, compare the eye orientation with the original shock before installing the M9516 in the front position. Gas-charged shocks hold pressurized nitrogen, so keep the unit intact during handling.
What’s included
One shock absorber with a shock boot, sold as each. Check the mounting hardware against your installation before starting.









