Overview
The Skyjacker SBE320 is a pair of front sway bar disconnects for the 1984–2001 Jeep Cherokee (XJ). Skyjacker describes them as double quick disconnects for 2WD and 4WD vehicles with a 3-4 inch lift, which lets the sway bar be disconnected for better off-road articulation.
Disconnecting the sway bar lets the front wheels move more independently over uneven ground. Skyjacker says these disconnects are easy to use and leave nothing to dangle or lose when the bar is detached. They are non-greasable.
Key features
- Supplied as a pair
- Double quick disconnect design
- Non-greasable type
- Front position with direct fit
- It is designed for a 3-4 inch lift setup.
Sway bar disconnect use
A sway bar connects the two sides of the front suspension, so when one wheel rises the bar twists and resists body roll. A disconnect lets the bar separate, so each wheel can move on its own over uneven ground. That is useful for articulation on the trail, but the bar is doing real work on pavement.
Disconnects are simple parts, yet they wear at the pivot and pin. Dirt and grit get into the moving parts, and a sticky pin can make disconnecting difficult. Clean the area after trail use and watch for play that could allow the bar to rattle.
- Reconnect the bar before street driving
- Clean the pivot after trail use
- Check the pin for play or stiffness
- Inspect the sway bar bushings during service
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SBE320 |
| UPC | 803696157733 |
| Position | Front |
| Quantity | Pair |
| Type | Non-greasable double quick disconnect |
| Lift | 3-4 inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ), including Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
For Wrangler or Grand Cherokee models, check your year, model and trim against the Cherokee fitment before ordering.
Installation notes
The disconnects let you free the sway bar for articulation, and the bar should be reconnected before normal street driving. Confirm your front lift falls within the 3-4 inch range before installing. Reconnect the sway bar for normal street driving, since a disconnected bar reduces body roll control.
What’s included
One pair of front sway bar disconnects.







