Overview
The Skyjacker Dual Steering Stabilizer Kit, part number 7217, is a complete Hydro Series dual steering stabilizer kit. It fits the 1994–1997 Dodge Ram 1500 in the Base, LT, Laramie, SS/T 5.9L, ST, Sport and WS trims, and the 1994–1997 Ram 2500 and Ram 3500 in the Base trim.
The kit includes brackets and a red shock boot. It comes with a limited lifetime warranty.
Key features
- Dual steering stabilizer configuration
- Complete kit with brackets
- Red shock boot included
- Hydro Series
- Limited lifetime warranty
Dual kits and steering geometry
Dual steering stabilizers share the damping load between two units, which is useful on trucks that carry heavy front ends or run larger tires. Each unit works in the same direction as the steering, so the pair resists quick steering movement and bump-induced kickback more evenly than a single unit can.
Because the stabilizers connect to the drag link and the frame or axle, the brackets set how they sit and how far they travel. A kit that comes with brackets removes the guesswork of matching parts, but the mounting points still need to clear the steering linkage, the frame and the axle tabs. Check clearance at full steering lock before final tightening.
Ram trucks of this era often have worn drag links, pitman arms or tie rod ends, and these can mimic stabilizer problems. Inspect those parts when the kit is fitted, and replace any worn joints so the new stabilizers are not working against play in the steering.
- Check clearance at full lock
- Inspect drag link and tie rod ends
- Check boot condition after first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7217 |
| Type | Complete dual steering stabilizer kit |
| Series | Hydro Series |
| Configuration | Dual |
| Shock boot | Red, included |
| Brackets | Included |
Vehicle fitment
Fitment covers the 1994–1997 Dodge Ram 1500, and the 1994–1997 Ram 2500 and 3500, in the trims named above.
Ram years outside 1994–1997, and Ram trucks not named here, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes brackets and a red shock boot, so the stabilizer mounting is complete as supplied. Check the bracket fit against your truck’s steering components before installing.
What’s included
Two stabilizers, brackets and a red shock boot, as a complete dual kit.









