Overview
The TeraFlex Falcon Nexus EF 2.1 steering stabilizer for stock 1-3/8 inch tie rods (part number TER01-02-21-110-138) is a single Jeep-specific stabilizer for 2007–2018 Jeep Wrangler JK and JKU models. It is a compact, affordable way to improve steering feel on a daily-driven Jeep.
It is built for the JK Wrangler and JKU Wrangler Unlimited. The Equal Force design provides a properly weighted steering feel, consistent bi-directional turning, balanced side-to-side response and an equal return to center. The Falcon Nexus EF line is engineered for fitment and function from the start.
The unit uses Falcon’s Volume Optimized Damping (VOD), a digressive linear valve that ramps up more quickly at low speed. That quicker ramp-up supports feel and control during low-speed turning on rough ground, and it helps keep side-to-side response steady.
Key features
- Volume Optimized Damping valve with a digressive linear design
- Quicker damping ramp-up for low-speed turning
- Consistent bi-directional turning
- Equal return to center dynamics
- Designed for the stock 1-3/8 inch tie rod
- Brackets included
Things to check before fitting
Tie rod size matters for steering stabilizers because the mounting points and clearance depend on the rod diameter. A stabilizer sized for one tie rod may not seat properly on another, so measuring the rod before buying prevents a return and a delayed install.
Older JK Wranglers often show worn steering parts ahead of the stabilizer. Ball joints, drag link ends and track bar bushings all affect how a damper feels, and replacing them together gives a cleaner result. Recheck the stabilizer hardware after the first few trail runs, since bolts can settle under load.
- Measure the tie rod diameter before ordering
- Inspect ball joints and drag link ends
- Check stabilizer bushings for cracks
- Recheck bolt torque after the first trail runs
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER01-02-21-110-138 |
| Series | Falcon Nexus EF 2.1 (Equal Force) |
| Tie rod | Stock 1-3/8 inch |
| Damping | Volume Optimized Damping |
| Single or dual | Single |
| Brackets | Included |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in both 2-door and Unlimited 4-door form.
The list does not include the 2019 JL or other Jeep Wranglers, or the Gladiator, and it covers JK models only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the tie rod before ordering, because this model is made for the stock 1-3/8 inch size. Brackets come with the single stabilizer. Fit depends on matching the tie rod on your Jeep.
What’s included
One Falcon Nexus EF 2.1 steering stabilizer with brackets.









