Overview
The Skyjacker Dual Steering Stabilizer Kit, part number 7276, is a complete Hydro Series dual kit for early Toyota trucks. It fits the 1984–1985 Toyota 4Runner in the DLX and SR5 trims, and the 1984–1985 Toyota Pickup in the Base, DLX, DLX Turbo, SR5 and SR5 Turbo trims.
The kit includes brackets and a red shock boot, and Skyjacker gives it a limited lifetime warranty.
Key features
- Dual steering stabilizer configuration
- Complete kit with brackets
- Red shock boot included
- Hydro Series
- Limited lifetime warranty
Older trucks and steering wear
Early Toyota 4Runners and pickups were often driven on rough roads and trails, and their steering linkage has had decades to wear. A stabilizer can only damp movement well when the joints around it are tight, so the condition of the drag link, tie rods and steering box is worth checking before any new damper goes on.
Original rubber bushings, pitman arms and idler arms are common wear points on trucks of this age. Play in these parts lets the axle move more than the stabilizers can control, which shows up as wander, vibration over bumps or a loose feel. Replacing worn joints alongside the kit helps the new units do their job and gives a more predictable steering response.
Rust is another consideration. Mounting points and bracket bolts can corrode, so clean the threads and replace any fastener that is damaged. Check the stabilizer ends regularly, and wipe the boots clean after mud or water crossings.
- Inspect drag link and tie rod ends
- Check idler and pitman arm play
- Clean and inspect mounting bolts
- Wipe boots after water crossings
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7276 |
| Type | Complete dual steering stabilizer kit |
| Series | Hydro Series |
| Configuration | Dual |
| Shock boot | Red, included |
| Brackets | Included |
Vehicle fitment
Fitment covers the 1984–1985 Toyota 4Runner and the 1984–1985 Toyota Pickup, in the trims named above.
Other Toyota models and years outside 1984–1985 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes brackets and a red shock boot, so the mounts are supplied. Check the fit against your 4Runner or pickup steering components before installing.
What’s included
A complete dual kit with brackets and a red shock boot.









