Overview
The Mishimoto Oil Cooler Kit, part number M/AMMOC-WRA-07, is a direct-fit oil cooler kit for the 2007–2011 Jeep Wrangler JK. It keeps oil temperatures in check when a JK is driven hard on dunes, trails or in extreme conditions. Excessive temperatures cause rapid oil degradation, which this kit is designed to address.
The kit uses JK-specific mounting brackets, pre-made stainless steel lines and an oil filter sandwich plate, so the cooler is positioned for this vehicle rather than adapted from a universal design. It adds .75 qt to oil capacity, reduces temperatures by up to 40 degrees F and keeps pressure drop to a minimum.
Key features
- JK-specific mounting brackets
- Pre-made stainless steel oil lines
- Oil filter sandwich plate
- All hardware needed for installation
- Adds .75 qt to oil capacity
- Reduces oil temperatures by up to 40 degrees F while maintaining minimal pressure drop
Oil cooling for a Wrangler JK
Heat is the main driver of oil breakdown, and a Wrangler JK that spends time on steep grades or low-speed trail work can run hot even when the engine is healthy. An oil cooler gives the oil another route for heat to leave the engine, which helps when airflow over the engine is limited. Consider how you drive before deciding how much cooling you need.
A kit that adds oil capacity changes the fill level, so the oil and filter service should follow the new volume. Keep the dipstick check on the regular inspection list, since a cooler and its lines can hold a surprising amount of oil. Look for seepage at the sandwich plate and fittings during each service.
- Recheck oil level after the first few drives
- Keep the cooler clear of mud and debris
- Inspect stainless lines for chafing
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | M/AMMOC-WRA-07 |
| Type | Direct-fit oil cooler kit |
| Vehicle | Jeep Wrangler JK |
| Added oil capacity | .75 qt |
| Temperature reduction | Up to 40 degrees F |
| Fitment | Direct fit |
Vehicle fitment
Fits the 2007–2011 Jeep Wrangler JK, including two-door and four-door models in the 70th Anniversary, Rubicon, Sahara, Sport and X trims, plus Unlimited versions of those trims.
Confirm your vehicle’s year, model and trim before ordering. Wranglers from 2012 onward and JL models fall outside this fit.
Installation notes
The sandwich plate fits at the oil filter position, so the filter arrangement changes during installation. Route the stainless lines clear of the exhaust, steering and suspension parts before tightening any fitting. Because the kit adds .75 qt of oil capacity, check the dipstick after installation and after the first warm-up.
What’s included
The kit includes the JK-specific mounting brackets, pre-made stainless steel lines, the oil filter sandwich plate and all hardware for installation.
Not included: the engine oil needed to fill the additional .75 qt of capacity.











