Overview
The California Super Trucks shift linkage relocation bracket, part number CSS-C22-13, relocates the shift linkage. It fits 2016 to 2018 Chevrolet Silverado 2500 HD and 3500 HD trucks and GMC Sierra 2500 HD and 3500 HD trucks.
It is used together with the CSP-C28-1 driveshaft. It has a durable high gloss powder coat finish.
Key features
- Relocates the shift linkage
- Used in conjunction with the CSP-C28-1 driveshaft
- Durable high gloss powder coat finish
- All hardware included
Installing the relocation bracket
A relocation bracket moves the shift linkage to a new position, so the linkage geometry changes once it is in place. Before starting, mark the existing linkage position and inspect the joints, bushings and fasteners for wear. Replacing worn joints while the linkage is accessible prevents binding later.
Once installed, cycle the shifter through every gear and range with the engine off, watching for sticking, over-travel or contact with nearby parts. Recheck the fasteners after the first drives, since new brackets can settle as the linkage bears load. Keep the driveshaft clear of the bracket throughout its travel.
Work on level ground with the wheels chocked and the truck supported before crawling underneath. Take the time to route any cables and wiring clear of the new bracket position.
- Mark the original linkage position first
- Check joints and bushings for wear
- Cycle every gear before the first drive
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C22-13 |
| UPC | 700007978681 |
| Finish | High gloss powder coat |
| Companion part | CSP-C28-1 driveshaft |
| Hardware | All hardware included |
Vehicle fitment
Manufacturer fitment lists 2016 to 2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ and WT) and 3500 HD, plus GMC Sierra 2500 HD (Base, Denali, SLE and SLT) and 3500 HD.
It fits the Silverado and Sierra 2500 HD and 3500 HD models above; Silverado and Sierra 1500 models and other model years are outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bracket relocates the shift linkage, check that the linkage engages every gear through its full travel after installation and before driving. Secure the truck on level ground and chock the wheels before working underneath it.
What’s included
All hardware is included with the bracket.
Not included: The CSP-C28-1 driveshaft is a companion part and is not included with the bracket.









