Overview
The California Super Trucks front skid plate, part number CSS-C29-17, is a laser cut aluminum skid for trucks running an 8 to 10 inch California Super Trucks lift. It mounts at the front of the vehicle as a direct bolt-in application.
It fits the 2011 to 2018 Chevrolet Silverado 2500 HD and 3500 HD and the GMC Sierra 2500 HD and 3500 HD. Because the plate is sized to the CST lift, the lift height is the key fit figure, along with the HD models it fits.
Key features
- Laser cut aluminum construction
- Laser cut California Super Trucks logo
- Direct bolt-in application
- Includes all hardware
- Built for an 8 to 10 inch CST lift
Front impact and lift height
A front skid plate takes the first hit when the truck noses into a rock, a stump or a ledge. Raising the truck with a lift changes how the bumper and skid sit relative to the ground, so the plate can meet obstacles that a stock height truck would clear. Keeping the lift and the plate matched helps the mounting points carry those loads as intended.
After rough trail days, look over the mount bolts, the brackets and the edges of the plate. Loose fasteners, bent tabs or scuffing near the mounts are signs the plate has taken a hard impact. Clean mud and rock debris off the underside so wear shows up early. Front skids are often checked alongside the bumper and tow points, because the same impact loads travel through those connections.
- Recheck mount bolts after the first few trail outings
- Look for bent edges or cracks near the mounting tabs after hard hits
- Clear packed debris from the underside to spot scuffs early
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C29-17 |
| UPC | 700008096441 |
| Position | Front |
| Material | Aluminum, laser cut |
| Lift compatibility | 8 to 10 inch CST lift |
| Hardware | All hardware included |
| Installation | Direct bolt-in |
Vehicle fitment
It fits the 2011-2018 Chevrolet Silverado 2500 HD and 3500 HD, and the 2011-2018 GMC Sierra 2500 HD and 3500 HD.
The list covers HD trucks only, so 1500 models are not confirmed. The plate is sized for the 8 to 10 inch lift, so a different lift height is not confirmed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct bolt-in with all hardware included, so no drilling is required for the install.
What’s included
The front aluminum skid plate with all hardware.







