Overview
The Spartacus 11544.62 is a bumper kit for the 2007-2018 Jeep Wrangler JK. It includes a front bumper with an over-rider bar, a winch plate, a rear bumper and a set of D-rings, which adds function and an off-road look to the Wrangler.
Both bumpers are 11-gauge steel made by a stamping process, and they can change between wide and narrow configurations. Rugged Ridge says they are lighter than most aftermarket bumpers.
The soft contours of the Spartacus stamped steel bumpers give the kit a modern look, and stamping forms the high strength 11-gauge steel used for both bumpers.
This kit adds an over-rider bar, a winch plate, the rear bumper and D-ring shackles to the basic front bumper. Both bumpers change between wide and narrow configurations.
Rugged Ridge lists US design patents D760,133, D775,013 and D776,582 for the Spartacus bumpers. Compared with the 11544.6 kit, this one adds the over-rider bar and winch plate, and it leaves out the grille and tire carrier found in the 11544.64.
Key features
- Front bumper with over-rider bar
- Winch plate included
- Spartacus rear bumper
- D-ring shackles included
- High strength 11-gauge steel
- Wide or narrow configuration
Winch and bumper planning
An over-rider bar on the front bumper protects the corners and gives a clear point for the winch and recovery gear. The bar and the winch plate work together, so check how they line up before the bumper is final. Confirm that the winch’s weight and mounting pattern suit the plate before the winch goes on.
The rear bumper adds a second attachment point for recovery, which is useful for pulls in either direction. Route the cable and straps so they do not rub the bumper edges, and inspect the D-ring shackles before each trip. Keep the pins and threads clean and lubricated.
Adjusting the bumper width changes both the look and the clearance around the tires. Measure clearance once the setup is complete and recheck all bolts after the first few trail runs.
- Align the over-rider bar with the winch plate.
- Route cable away from rubbing edges.
- Recheck bolts after the first few trail runs.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11544.62 |
| UPC | 804314285234 |
| Product type | Front and rear bumper kit with over-rider bar and winch plate |
| Finish | Powder coat |
| Material | Steel, 11-gauge |
| Width | Full; convertible to wide or narrow |
| Winch mount | Included |
| D-ring mount | Included |
| Light mounts | Not included |
| Fit type | Direct fit |
Vehicle fitment
The 11544.62 fits 2007-2018 Jeep Wrangler JK models.
The 11544.64 version adds a grille and tire carrier. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Spartacus front bumper with over-rider bar, winch plate, rear bumper and a set of D-rings.
Not included: The winch itself and lights.














