Overview
The Bestop HighRock 4×4 High Access Front Winch Bumper in matte black, part number 44918-01, is a steel winch bumper for the 2007–2018 Jeep Wrangler (JK), covering two-door and four-door models. It is the same bumper as Bestop’s standard HighRock design, in a flat black finish.
The High Access Front Bumper is designed for off-road clearance, with winch-ready construction.
Key features
- Matte black finish on the same powder-coat design as the standard HighRock bumper
- High-access design for off-road clearance
- Flat mounting surface for a winch
- Fairlead plate included
- Extremely heavy-duty D-ring tabs included
- Fits two-door and four-door Wranglers
Winch and recovery setup
A front winch bumper carries the winch, fairlead and recovery loads, so the mounting points matter as much as the bumper itself. Before fitting a winch, check that its mounting plate, cable routing and control wiring match the flat winch surface and fairlead plate on this bumper. Choose a winch rated for the weight of your Wrangler with its gear and accessories, and remember that a heavier winch adds load to the front suspension and steering components.
After installation, look over the welds and mounting hardware, and recheck every bolt after the first few trail runs. Keep the fairlead clear of debris and inspect the cable for fraying each time you use it. Powder coat can chip where straps and shackles rub, so touch up bare steel with paint to slow surface rust.
- Check winch cable length and drum size before buying
- Use the fairlead plate with a roller or hawse as needed
- Re-check torque on winch and bumper bolts after the first trips
Specifications
| Brand | Bestop |
|---|---|
| Part number | 44918-01 |
| UPC | 77848098452 |
| Product type | Front winch bumper |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Textured matte black powder coat |
| D-ring mount | Included |
| Light mounts | Included |
| Winch mount | Included, flat mounting surface and fairlead plate |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), in both two-door and four-door models.
It does not fit the Wrangler TJ or JL. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The front bumper with D-ring tabs, fairlead plate, winch mounting surface and light mounts.
Not included: The approach roller and grill guard, which are sold separately.









