Overview
The Rugged Ridge 16595.35 is a rear cast iron differential cover for the Dana 35 axle. It is made from 3/8 inch cast steel, painted black inside and out, with reinforced protection for the fill plug.
A broken cover can be replaced under warranty. Dana and Jeep are common axle makers for this axle type.
Key features
- 3/8 inch cast steel body
- Painted black inside and out
- Reinforced protection for the fill plug
- Part number 16595.35 with UPC 804314123505
Working on Dana 35 axles
The Dana 35 is a heavy axle used in many off-road builds, so its rear cover sees strong loads and rough terrain. A cast cover like this one protects the carrier from impacts, but the bolt holes and fill plug threads still need regular inspection for damage and wear. Plan for fluid spills, since gear oil is slippery and can leak from the drain as the cover loosens.
Before pulling the cover, drain the gear oil and check the fluid for metal particles. Clean the housing face fully, and use a fresh gasket so the seal sits flat. Torque the bolts evenly in a crisscross pattern to avoid warping the flange.
- Drain the oil before removing the cover
- Inspect fill plug threads for wear
- Use a fresh gasket on reinstall
- Refill and check the level after install
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 16595.35 |
| UPC | 804314123505 |
| Axle location | Rear |
| Axle type | Dana 35 |
| Popular axle manufacturers | Dana, Jeep |
| Material | Iron (listed); 3/8 inch cast steel (described) |
| Finish | Powder coated (listed) |
| Oil capacity | Standard capacity |
Vehicle fitment
No vehicle is named. Dana 35 is an axle type, and Jeep appears only as an axle manufacturer, not a model year, so check your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Expect to drain the gear oil first, then remove the old cover.
What’s included
All mounting hardware and instructions are included.












