Overview
The Rubicon Express SK010834RXT is a complete set of twin tube lift shocks for 3.5 to 4.5 inch lift applications. Each shock is a hydraulic, coil spring valved twin tube design with a stem to loop configuration.
Fit depends on the vehicle and the shock length, so check both against your setup before buying.
Shock service and wear
Shock absorbers control how quickly the suspension compresses and rebounds, so they play a large part in how a lifted vehicle handles on pavement and on rough trails. When a lift changes ride height, the shock angle and length change too, which is why a shock built for a specific lift range matters. A hydraulic twin tube design keeps damping consistent as the oil heats up during extended off-road use.
Worn shocks often show up as a bouncy ride, fluid seeping from the body, or a vehicle that keeps rocking after a bump. Look over the seals and mounting ends during routine checks, and replace bushings or hardware that show cracking. Shocks are usually replaced in pairs on the same axle so damping stays balanced from side to side.
Before installing, plan for the rest of the lift system. Upgraded springs, control arms and brake line length can all affect shock movement and clearance. Recheck mounting bolts after the first few trail runs and inspect the stem to loop joints after each hard outing.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | SK010834RXT |
| UPC | 614901450668 |
| Lift range | 3.5 to 4.5 in |
| Shock type | Hydraulic twin tube |
| Valving | Coil spring valved |
| Mounting | Stem to loop |
Vehicle fitment
Verify the year, model, trim and shock length against your vehicle before buying.
What’s included
A complete set of lift shocks.

