Overview
The Rubicon Express RE1133 is a pair of extreme-duty front sway bar disconnects, supplied as a complete set with the sway bar ends, center tubes and quick release pins. Disconnecting the front sway bar lets the front axle articulate further over uneven ground, which the manufacturer presents as the purpose of the part. The threaded body is adjustable for different lift heights and for setting the sway bar angle, so the same set can be dialed in to a lift.
The disconnects work with both stock and lifted suspensions. A zinc-plated snap pin releases the bar for quick service, and a tapered post with a spherical bushing reconnects it. No tools are needed for reconnection. Verify your year, model and trim match before you order.
Key features
- Sway bar disconnect set sold as a pair
- Sway bar ends included
- Center tubes included
- Quick release pins
- Heavy duty threaded body for lift height adjustment
- Zinc-plated snap pin
- Tapered post and spherical bushing for reconnection
- Pre-installed grease fittings
- Silver powder coat finish
Before you buy
The sway bar is part of how the front axle stays controlled, so a disconnect set changes more than articulation. Once the bar is released, body roll increases and the steering feel changes, which is why it needs to be reconnected before the truck is driven on the road. Plan the install around the time you can dedicate to setting and checking the set.
Quick release pins make the trail routine faster, but they only help if they stay in place. Keep the pins clean and check that they seat fully before each run. Pairing the disconnects with new sway bar end links and fresh bushings is a common step when the existing parts show play, since they carry the same loads.
- Keep spare pins in the glovebox
- Check the threaded length after the first few trips
- Grease the bushings on a regular schedule
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1133 |
| UPC | 614901143300 |
| Position | Front, pair |
| Included | Sway bar ends, center tubes, quick release pins |
| Body | Threaded, adjustable |
| Bushings | Spherical, greasable |
| Finish | Silver powder coat |
| Fitment type | Direct fit (vehicles not named) |
Vehicle fitment
Disconnects change how the front sway bar works, so the sway bar and axle layout must match the vehicle. Check that the set suits your truck before buying.
Disconnects change how the front sway bar works, so the vehicle match matters more than for a simple bolt-on part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the threaded length for the lift height and the desired sway bar angle, then tighten the locknuts. Reconnect and check the sway bar before driving the vehicle on the road. Grease the fittings after the install.
What’s included
Includes the sway bar ends, center tubes and quick release pins, supplied as a pair.
