Overview
The Rock Krawler RK04033 Large Joint Retainer is used to rebuild or repair Krawler Joints and Pro Flex Series Joints.
Removing and installing the large joint retainer requires the RK04484 Large Joint Socket Tool, which is a separate item.
Key features
- Large joint retainer for Krawler Joints
- Also used with Pro Flex Series Joints
- Supports rebuild and repair work on joints
- Requires RK04484 Large Joint Socket Tool for removal and installation
Rebuilding a Krawler joint
A joint retainer holds components in place while a joint is opened, cleaned and reassembled. Before starting, clear the work area, label parts in the order they come off, and keep the joint clean so grit does not enter the bearing surfaces. A clean bench with a tray for small parts helps too.
Inspect the joint for wear, pitting and play once it is apart. Replace parts that show damage rather than reusing them, and check that the retainer seats fully before the joint goes back on the vehicle.
Pro Flex Series and Krawler joints can share service steps, but confirm the joint type first because part sizes differ. Keep a torque wrench and a fresh supply of grease ready, and follow the reassembly order you noted.
- Clean the joint before opening it
- Replace worn parts rather than reusing them
- Confirm joint type before buying parts
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK04033 |
| Type | Large joint retainer |
| Joint types | Krawler Joints, Pro Flex Series Joints |
| Required tool | RK04484 Large Joint Socket Tool (separate item) |
Vehicle fitment
Confirm the joint type you are rebuilding matches Krawler or Pro Flex Series before ordering.
Installation notes
Have the RK04484 tool on hand before starting work on the joint, because the retainer cannot be removed or installed without it.
What’s included
Large Joint Retainer, part RK04033.
Not included: RK04484 Large Joint Socket Tool, which removal and installation require.









