Overview
The Rubicon Express RE1476 is a degree cam bolt kit for the front lower cam bolts. It lets you adjust the Jeep’s pinion angle for proper driveline phasing and helps eliminate vibration.
It is made for 2 and 4-door models and sold as a pair. Check the year, model and trim against your vehicle before ordering.
Key features
- Front lower cam bolts
- Adjusts pinion angle
- Supports driveline phasing
- Helps eliminate vibration
- Sold as a pair
Pinion angle basics
Pinion angle is the angle between the driveshaft and the pinion gear in the axle. When it is off, the driveline can vibrate, and the u-joints wear faster. Adjusting the front lower cam bolts changes that angle in small steps, so the driveline can be brought closer to its intended phasing. Front axle angle changes with ride height, so the reading you take on the ground is the one that matters.
Measure pinion angle with an angle finder on a level surface, both at rest and with the suspension loaded. Make small adjustments, then road test before fine tuning. Shims or a lift can change the angle too, so recheck after any suspension work.
- Measure at the pinion flange and driveshaft
- Make small adjustments and retest
- Recheck after tire or lift changes
- Inspect u-joints for wear during setup
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1476 |
| UPC | 614901438420 |
| Position | Front lower |
| Body style | 2 and 4-door models |
| Sold as | Pair |
| Fitment | Direct fit |
Vehicle fitment
The kit is made for 2 and 4-door models. Check the year, model and trim against your vehicle, and check the front lower cam bolt position on your axle.
Confirm your vehicle’s year, model and trim before ordering, and check the front lower cam bolt position on your axle.











