Overview
The Icon Suspension 51200 is a full length rear leaf spring expansion pack for the Toyota Tundra, adding 1.5 inches of lift. It is made for 2007 to current Tundra trucks and works differently from a traditional add-a-leaf, which gains lift by stiffening the spring rate.
This pack replaces the factory secondary leaves and keeps the factory main and overload springs. Its spring rate is tuned for ride comfort, and it is designed to maintain load and towing capacities while increasing wheel travel.
Key features
- Full length Toyota Tundra leaf spring expansion pack
- Replaces the factory secondary leaves
- Retains the factory main and overload springs
- Adds 1.5 inches of rear lift
- Spring rate tuned for ride comfort and wheel travel.
Ride and load considerations
Rear leaf springs carry both the vehicle’s weight and cargo or trailer tongue load, so any lift change alters how the rear sits and handles. A pack that keeps the factory main and overload springs works within the original spring stack, which helps keep rear geometry close to stock. A 1.5 inch rear lift still changes pinion angle, so driveline angles should be measured after installation.
Expansion packs are often installed with new shocks, longer brake lines and a suitable brake hose, depending on the setup. Check shock length and bump stop clearance once the ride height changes. Re-torque U-bolts after the first few drives, and inspect the spring pads and leaf surfaces for wear during routine service.
- Measure pinion and driveline angles after installation
- Check shock length for the new ride height
- Inspect spring pads and bushings during service
- Confirm steering and brake line clearance
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 51200 |
| UPC | 70000540575 |
| Lift height | 1.5 inches |
| Position | Rear |
| Application | Toyota Tundra, 2007 to current |
Vehicle fitment
It is a fit for the 2007 to current Toyota Tundra. Confirm the year and model before installing.
Confirm your vehicle’s year, model and trim before ordering. It fits the Tundra, not the Tacoma.
Installation notes
The factory main leaf and overload stay in place while the secondary leaves are replaced. Check alignment and driveline angles after installation.
What’s included
Check the package contents against your installation, including U-bolts and center pins, before starting.






