Overview
The Revtek AALT16B is a rear add-a-leaf kit, part number AALT16B, listed at 1.5 in. An add-a-leaf adds a supplemental leaf to a leaf spring pack, and this kit is set up for the rear of the vehicle.
This kit is a rear add-a-leaf with part number AALT16B, sized at 1.5 in. Check fit against your rear spring pack before ordering.
Before you install
An add-a-leaf works by adding a supplemental leaf to the existing spring pack, so the spring takes on more load before the main leaves start to bend. Owners who carry heavier loads on the rear axle often use this kind of kit to firm up the ride without replacing the full pack. The added leaf shares the load with the main leaves, so ride height and spring rate both change somewhat after installation.
A pack with worn bushings, cracked leaves or a sagging arch is a poor candidate for a supplemental leaf. Inspect the existing leaves, center bolts and clips first. Shackles and bushings are often replaced during the same job, since loose joints wear the new leaf unevenly.
- Inspect leaf clips and the center bolt before fitting
- Replace worn shackles and bushings in the same job
- Re-check U-bolt and clamp torque after the first few drives
Specifications
| Brand | Revtek |
|---|---|
| Part number | AALT16B |
| UPC | 811323012997 |
| Type | Add-A-Leaf kit |
| Position | Rear |
| Listed size | 1.5 in. |
Vehicle fitment
Before buying, match the kit to your rear spring pack and to your vehicle’s year, model and trim.
What’s included
Check the package contents against your installation before starting.








