Overview
The Rubicon Express 4.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar, No Shocks, part RE7204, is a long arm suspension lift for the 1997–2002 Jeep Wrangler TJ. Its lift height range is 3 to 4.99 inches, and no shock absorbers come in the box.
This long arm system uses longer control arms to improve lifted geometry. It is designed to add stability on and off road, reduce torque roll and increase trail traction over short arm lifts.
The kit is sold without shock absorbers, so a shock must be chosen to suit the 3 to 4.99 inch range before the install. The front and rear stainless lines are supplied, which gives a flexible line run for the raised suspension. Shocks and lines are both worth checking at the same time, since they affect how the truck handles a lift of this size on the trail.
Key features
- Chromoly long control arms
- PT-Meg Super-Ride bushings designed for on- and off-road use
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs
- Rear track bar included
- Front and rear stainless brake lines included
- Three-piece belly pan
Choosing shocks for the lift
A 4.5-inch-class lift changes shock length and angle, so shock choice matters more than on a small lift. Look for a shock rated for the lift range and check its eyes against the new arm and frame mounts. Bench-fitting before the vehicle is up on stands saves a lot of time.
Mixing old and new parts can cause trouble. Old shocks may be worn, and a worn shock can hide a problem that shows up only after the lift. Inspect the shock bushings and the upper mounts at the same time, and replace any that are cracked or loose before the new arms take load.
- Confirm shock length against the lift range
- Check upper and lower mount clearance
- Inspect old shock bushings and hardware
- Test full compression before the first drive
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7204 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Extreme-Duty long arm |
| Rear lift method | Coil springs |
| Shock absorbers | Not included |
| Brake lines | Front and rear stainless |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2002 Jeep Wrangler (TJ) in the SE, Sahara, Sport and X models.
The 2003–2006 TJ and the LJ Unlimited are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit has no shocks, the existing shocks need to be checked against the 4.5-inch-class lift before the arms go in. Set the alignment and check the driveline angles afterward.
What’s included
Stainless front and rear brake lines, chromoly long arms, PT-Meg bushings, Super-Flex spherical ball joints, tuned lift springs, a rear track bar and a three-piece belly pan.
Not included: shock absorbers.






