Overview
The Rubicon Express RXR714 is a rear adjustable reservoir monotube shock for the 2007 to 2018 Jeep Wrangler JK, in two- and four-door models. It is built for a 2.5 to 3.5 inch lift and is gas charged.
The gas charged monotube body is supported by an external reservoir, which Rubicon Express says doubles the fluid capacity to shed heat. The shock is tuned to Rubicon Express spring rates and has eight stages of compression adjustability for ride comfort on different terrain.
Key features
- Remote reservoir for added cooling and fluid capacity
- Eight stages of compression adjustability
- JK-specific custom valving
- Large -6 hose with 360-degree swivel banjos
- 3/4-inch hard chrome shaft to prevent buckling
- Wiper seal to keep out contamination
- Black anodized, CNC machined 6061-T6 ends and an epoxy painted body
- Reservoir mounts included
Keeping a remote reservoir shock working
A remote reservoir gives the gas charged body more fluid to work with, which helps the shock hold steady when it gets hot on long descents or repeated bumps. Heat is a common reason shocks lose control, so keeping airflow around the reservoir and hose matters. Mount the reservoir where it is not hit by rocks, and route the hose so it cannot rub on the tire, frame or axle when the suspension cycles.
Compression adjustment is easiest to use when you change one setting at a time and drive the same stretch of trail each time. Stiffer settings help control body motion on rough ground, while softer settings can smooth out small bumps. Replacing shocks in pairs keeps the rear end balanced, and checking the swivel banjos for leaks is a quick routine task after each trip.
- Inspect the hose and banjos for wear or leaks
- Check reservoir mounts after the first drives
- Clean grit from the shaft before it retracts
- Recheck the bar pin and loop bushings periodically
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXR714 |
| Type | Adjustable reservoir monotube, gas charged |
| Lift range | 2.5 to 3.5 inches |
| Extended length | 24.5 inches |
| Collapsed length | 15.6 inches |
| Body | 2-inch seamless alloy with epoxy painted finish |
| Shaft | 3/4-inch hard chrome |
| Ends | Black anodized, CNC machined 6061-T6 |
| Mount type | Bar pin and loop |
| Hose and banjos | Large -6 hose with 360-degree swivel banjos |
| Compression adjustment | 8 stages |
Vehicle fitment
This shock is for the 2007 to 2018 Jeep Wrangler JK in two- and four-door models. The JK chassis places it in those model years, and the valving is JK-specific.
It does not cover the Wrangler TJ, LJ or JL, or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the shock is built for a 2.5 to 3.5 inch lift, check that your lift falls in that range before ordering. The reservoir mounts are included for the remote reservoir.
What’s included
One rear shock with reservoir mounts.




















