Overview
The Fox Racing Shox 980-24-959 is a 2.0 Performance Series reservoir shock for the front of selected Chevrolet and GMC trucks and SUVs, plus the Hummer H2. It is a direct fit with a lift range of w/0 – 1 in. and a gas charged design.
Travel and lengths are not confirmed for this part number. Measure the factory unit before fitting so you can compare it with this shock.
Key features
- Front position, direct fit
- Reservoir shock in the 2.0 Performance Series
- Gas charged
- Lift range of w/0 – 1 in.
- Lists 20 model and year entries from 1999 to 2013
Front shock on lifted trucks
A front reservoir shock controls the heavier end of a truck, where steering geometry and braking loads both affect how the vehicle feels. When lift height changes, the shock angle and available stroke change too, so the fitting should be checked against the actual ride height rather than the stock figures. Small changes in geometry can alter steering feel and tire wear over time.
Look at the reservoir clearance on both sides of the truck, since the reservoir needs room for its hose or bracket through full steering lock and suspension travel. Inspect the shock body, mounts and bushings after rough driving, and replace worn hardware at the same time. Front shocks are usually best replaced in pairs so both sides damp the same way.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-959 |
| UPC | 70000618105 |
| Series | 2.0 Performance Series |
| Shock type | Reservoir shock |
| Charge | Gas charged |
| Position | Front |
| Fitment | Direct fit |
| Lift height | w/0 – 1 in. |
Vehicle fitment
This front shock fits 1999–2013 Chevrolet and GMC trucks and SUVs, including Silverado and Sierra 1500 HD, 2500, 2500 HD and 3500 models, the Avalanche 2500, Suburban 2500, Yukon XL 2500 and the Hummer H2 (Base). Trims vary, such as Base, LS, LT, WT, SL, SLE, SLT and LTZ.
Silverado 2500 HD and Sierra 2500 HD model years after 2010 are not in this list, and neither are Suburban years after 2013. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The w/0 – 1 in. lift range suits stock to 1-inch lift setups. Confirm your front lift height before fitting.
What’s included
Package contents, including hardware, are not confirmed for this part number. Check them against your installation before starting.






