Overview
It is an RS9000XL Series shock absorber with 9-position manually adjustable damping, intended for on- and off-road trucks, SUVs and Jeeps. It carries the same adjustable design as the rest of the series.
The listed lengths are 31.230 in. extended, 18.930 in. collapsed and 12.300 in. stroke. The body is 2.75 in. in diameter and the piston rod is 18mm, but Rancho notes those sizes apply on select applications only, so check the application before fitting.
Adjustable damping helps offset the extra unsprung mass of larger tire and wheel combinations, which is worth weighing if you run bigger tires. The unit is engineered and manufactured in the U.S. It comes with a Limited Lifetime Warranty and a 90-Day Free Ride Offer.
Key features
- 9-position manually adjustable damping
- Nitrogen gas charged design
- Liquid metallic finish
- Engineered and manufactured in the U.S.
- 2.75-in. body and 18mm piston rod on select applications
- Limited Lifetime Warranty with a 90-Day Free Ride Offer
Sizing a replacement shock
Length is the first check when replacing any shock. Compare the extended and collapsed lengths with the shock you are removing, since a shock that is too long or too short will bind at full travel or leave the suspension partly unloaded. Stroke, the distance between those two lengths, shows how much travel the shock can control.
Adjustable shocks are useful for owners who run different tire sizes or loads, because the setting can be changed to match the weight and terrain. Larger tires add unsprung mass, so a firmer setting may help control wheel movement. Adjustments are easiest to judge after a short test drive.
Before installing, inspect the mounting points for wear and confirm the bushings match what the truck needs. Replacing shocks in pairs keeps both sides of an axle responding the same way. Recheck the hardware after the first few drives, and note any leaks or noise that appear.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999047A |
| Shock series | RS9000XL |
| Extended length | 31.230 in. |
| Collapsed length | 18.930 in. |
| Stroke | 12.300 in. |
| Body diameter | 2.75 in. (select applications) |
| Piston rod | 18mm diameter (select applications) |
| Tuning | 9-position manual |
| Charge | Nitrogen gas charged |
| Finish | Liquid metallic |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Confirm the vehicles this part fits before ordering, and compare its 31.230 in. extended and 18.930 in. collapsed lengths with your current shock.
The body and rod sizes apply only on select applications. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the mounting hardware and accessories your installation needs before starting.














