Select your vehicle

Rancho RS9000XL Series Shock Absorber – RS999304

Rancho

Shop Rancho Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS999304 RS9000XL Series gas charged shock absorber
  • 2.75-inch (70mm) body with an 18mm rod
  • Nine-position tuning with the myRIDE manual or remote system
  • Protective boot included
  • Fitment not listed by vehicle

Description

Overview

The Rancho RS999304 is an RS9000XL Series gas charged shock absorber with a 2.75-inch (70mm) body and an 18mm rod, tuned through a 9-position system. It is a direct fit shock. Confirm fit for your vehicle’s year, model and trim before ordering.

The shock is built with polyurethane bushings, a liquid metallic finish and a protective boot. Rancho provides a limited lifetime warranty on it.

Key features

  • 2.75-inch (70mm) body diameter
  • Large 18mm rod
  • Nine-position tuning with the myRIDE manual or remote system
  • Nitrogen gas charged
  • Polyurethane bushings
  • Liquid metallic finish
  • Protective boot included

Tuning and shock choice

Shock absorbers control how the spring’s energy is released after a bump. Firm settings reduce body roll and dive, while softer settings take the edge off rough pavement. A multi-position shock lets you match the setting to your load and terrain, but it is wise to start at a middle setting and adjust in small steps over a few drives before settling on one.

Worn shocks show up as bounce after dips, nose dive under braking, or uneven tire wear. Boots keep dirt and grit off the shaft seal, so a torn boot is worth replacing. Polyurethane bushings resist wear well in many mounts, but they can squeak if not lubricated during install. Shocks are usually replaced in pairs on the same axle.

  • Replace shocks in pairs on the same axle
  • Inspect the boot for tears after off-road use
  • Check bushings for cracking or play during install

Specifications

Brand Rancho
Part number RS999304
UPC 10039703093047
Series RS9000XL
Body diameter 2.75 in (70mm)
Rod diameter 18mm
Gas charge Nitrogen
Tuning 9-position, myRIDE manual or remote
Bushings Polyurethane, red
Finish Liquid metallic
Included Protective boot
Warranty Limited lifetime

Vehicle fitment

Direct fit shock; the vehicle’s year, model and trim still need confirming before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One shock absorber with its protective boot.

SKU: RANRS999304 Category:

Specification

Shipping weight 8.30 lbs
Package dimensions 24.10 × 3.30 × 3.10 in
brands

Questions & Answers

Does the Rancho RS999304 come with a protective boot?

Yes. A protective boot is included with the RS999304. The shock also offers 9-position tuning and nitrogen gas charging, which are part of its design.

What are the body diameter and rod size?

The body is 2.75 inches (70mm) in diameter and the rod is 18mm. The shock uses polyurethane bushings and a liquid metallic finish.

Will the RS999304 fit my truck?

Confirm fit for your vehicle's year, model and trim before ordering. Fitment is direct, so check the year, make, model and trim against your truck before buying the shock.

How can you tell the shock needs replacing?

Look for fluid leaking down the body, a bouncy ride after dips, or cupped tire wear. A shock that no longer controls the spring can let the vehicle sway in turns. Test by pushing down on each corner; repeated bouncing suggests worn damping.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rancho Shock Absorbers on Amazon