Overview
The Rancho RS999931 is a 2.25 inch Loaded QuickLIFT front right quick-strut for select 2000–2006 Toyota Tundra and 2001–2007 Toyota Sequoia trucks and SUVs. It levels the front end and removes the factory nose-down rake, so the front of the vehicle sits higher.
Each unit is a complete gas charged assembly with the strut, coil spring and upper mount combined, so a separate spring does not need to be sourced. The added height allows larger tires, up to 35 inches depending on application. The strut has nine adjustment positions and works with the myRIDE Wireless Controller for changing ride quality from inside the cab. It suits owners who want more front lift without replacing the full suspension.
Key features
- Front right position
- Fully assembled quick-strut with coil spring and upper mount
- Gas charged design
- Nine-position adjustability
- Compatible with the myRIDE Wireless Controller for in-cab adjustment
- Levels the front and removes factory nose-down rake
- Supports larger tires, up to 35 inches depending on application
Tuning a gas charged strut
Gas charged struts hold a steady damping feel because the gas pressure reduces foaming under heavy use. That helps when the truck is loaded, towing or running over rough ground. The adjustment setting should be chosen with the load in mind, not only the way the truck feels empty.
Over time, check the strut for leaks, a clunk when turning, or uneven front height. A worn upper mount or coil spring can change the height and the ride, so inspect them with the strut. Keep the front tires at the correct pressure, since low pressure can mask a damper that has lost control.
- Set damping for the heaviest load you carry
- Look for oil on the strut body
- Inspect the upper mount when the strut is replaced
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999931 |
| Product line | Loaded QuickLIFT (QuickLift Series) |
| Lift height | 2.25 inch |
| Position | Front right |
| Charge type | Gas charged |
| Adjustability | 9 positions |
| Included | Coil spring, upper mount, strut |
| Compatible controller | myRIDE Wireless Controller |
| Larger tire capacity | Up to 35 inches, depending on application |
Vehicle fitment
Rancho’s manufacturer fitment list covers the following vehicles, with trims shown where listed:
- 2001–2007 Toyota Sequoia (Limited, SR5)
- 2000–2006 Toyota Tundra (Base, Limited, SR5)
Other Toyota trucks and SUVs, and model years outside these ranges, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a front strut assembly, plan on a wheel alignment after installation, since the height change alters front suspension geometry. The unit is supplied fully assembled, so the job is a strut replacement rather than a rebuild.
What’s included
Each unit includes the strut, coil spring and upper mount.
Not included: The myRIDE Wireless Controller works with this strut, but it is not part of the package.









