Overview
The Rancho RS999363 is a rear RS9000XL Series shock absorber for the 1999–2000 Land Rover Range Rover. Its 2.75-in. (70mm) body houses an 18mm Nitro Carb rod, and it is nitrogen gas charged with fade resistant hydraulic fluid.
This shock pairs with My Ride tuning, which offers 9-position adjustment. The RS9000XL line is built for big trucks and suits rugged performance on and off the road.
Key features
- 9-position adjustment for My Ride tuner pairing
- 18mm Nitro Carb piston rod
- Nitrogen gas charge
- Liquid metallic finish
- Polyurethane bushings
- Protective boot included
Rear shock inspection and wear
Rear shocks on a full-size vehicle take repeated loads from passengers, cargo and road surface changes. A shock that has lost damping can allow the rear to bounce after a dip, and the tires may start to cup. Inspect the body, boot and mounting eyes for dents, cracks and wet spots during routine service, since small damage can grow over time.
Pairing with a tuner can help match the ride to how the vehicle is used. Choose a firmer setting for towing or heavy loads and a softer one for daily driving, then recheck after a few trips. When replacing the shock, inspect the spring seat and bushings too, because worn parts can shorten the life of a new unit.
- Check the boot for splits
- Look for oil on the shock body
- Note any noise from the mounts
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999363 |
| Shock series | RS9000XL Series |
| Position | Rear |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm Nitro Carb |
| Charge type | Nitrogen gas charged |
| Fluid | Fade resistant hydraulic |
| Bushings | Polyurethane |
| Finish | Liquid metallic |
| Tuning | 9-position, My Ride compatible |
| Lift/drop | 0 in. |
| Fitment type | Direct fit |
| Protective boot | Included |
Vehicle fitment
Rancho’s list for this rear unit names the 1999–2000 Land Rover Range Rover, across Base, Callaway, County, HSE, HSK, S, SE and Vitesse trims.
Range Rover years outside 1999 through 2000 and other Land Rover models are not covered. Compare your vehicle’s year, model and trim with this fit before buying.
Installation notes
Rancho lists 0 in. lift/drop, so the rear shock is a stock-height replacement, not a lift part. Use a jack stand or a lift rated for the vehicle when you remove the original unit.
What’s included
Rancho lists one rear unit with its protective boot, and no mounting hardware is named.
Not included: the My Ride tuner, which is a separate system that this shock pairs with.














