Overview
The TeraFlex HD tie rod kit 4920288 (TER4920288) is a heavy-duty tie rod end kit for the Jeep Wrangler TJ and LJ, with an offset large-taper end and right-hand thread.
TeraFlex heavy-duty tie rod ends use a one-ton joint end. They come in a stock Jeep taper or a large one-ton taper (standard Dana 60). The large taper fits larger 60-type knuckles, such as the Tera CRD60 axle line, and offset ends help where the differential could interfere with the tie rod.
The kit is for owners upgrading steering strength on a TJ or LJ, in particular those with larger knuckles on a Dana 60 type axle.
Key features
- One-ton joint end
- Offset design
- Large taper end
- Right-hand thread
- Heavy-duty construction
Steering linkage wear
The tie rod connects the steering arm to the knuckle and carries steering load on every turn, so its joint ends wear quickly on trails. Play at the ball joint, a clicking sound in the turn, or uneven tire wear across the front tread are common signs. Tie rods with a one-ton joint end are built for heavier steering loads, which suits a vehicle with larger tires.
Match the taper and thread to the knuckle before buying. A large taper fits larger 60-type knuckles, while stock Dana 30 knuckle holes need the smaller stock taper. Check the thread direction on each end so both ends of the rod turn the right way for toe adjustment. Replace tie rod ends in pairs where possible so the steering feels even side to side.
- Check joint ends for play by hand
- Inspect boots for tears and grit
- Set toe after any tie rod change
- Recheck jam nuts after the first drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER4920288 |
| Joint | One-ton |
| Taper | Large (standard Dana 60) |
| Style | Offset |
| Thread | Right hand |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler (TJ) and the 2004-2006 Wrangler (LJ). For larger 60-type knuckles, a large-taper end is the right choice, so confirm the knuckle type before buying.
The large taper suits Dana 60 type knuckles, not the stock Dana 30 knuckle holes. Confirm your vehicle’s year, model and trim before ordering.









