Select your vehicle

Rock Hard 4X4 Parts 1-3/4 Inch Mounting Bracket – RH1021

Rock Hard 4x4 Parts

Shop Rock Hard 4X4 Parts Roll Cage on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Hard 4×4 Parts RH-1021 bolt-in mounting bracket
  • Clamps to 1-3/4 inch O.D. tubing
  • 5/16 x 18 threads in three directions for mounting electronic devices
  • Universal fit, not built for a specific vehicle

Description

Overview

The Rock Hard 4×4 Parts 1-3/4 Inch Mounting Bracket, part RH-1021, is a bolt-in bracket for mounting an electronic device to 1-3/4 inch O.D. tubing. It has 5/16 x 18 threads in three directions, so the device can be positioned on the tube.

Rock Hard 4×4 Parts names universal fit, so the bracket is an accessory that depends on tube size rather than on a specific vehicle.

Key features

  • Mounts to 1-3/4 inch O.D. tubing
  • 5/16 x 18 threads in three directions
  • Bolt-in installation
  • Designed to hold electronic devices

Mounting electronics on tubing

Clamp-style brackets put the weight of a device on two points of contact with the tube, so the fit between bracket and tubing matters for stability. A bracket that sits loosely on a bar can rotate under vibration, which can shift a screen or antenna out of view. Tighten the bolts evenly and check that the bracket sits square to the tube before mounting the device.

Threaded mounts make it easier to change device position, but threads can strip if the device is heavy or the bolts are overtightened. Use the correct thread for the device, add a bit of thread locker if the design allows, and check the bolts after rough trails. Keep cables routed away from the tube’s sharp edges and from moving parts.

  • Confirm the tube is 1-3/4 inch O.D. before buying
  • Tighten bolts evenly across the bracket
  • Route cables clear of moving parts

Specifications

Brand Rock Hard 4×4 Parts
Part number RH-1021
UPC 70000444632
Tube size 1-3/4 inch O.D.
Thread 5/16 x 18, tapered, in 3 directions
Installation type Bolt in
Fitment Universal fit

Vehicle fitment

No specific vehicle is named for this bracket. It is a universal accessory mount for 1-3/4 inch O.D. tubing, so the tube size is what matters, not the make, model or year.

Confirm the tube is 1-3/4 inch O.D. and confirm your vehicle’s year, model and trim before ordering.

Installation notes

The bracket is a bolt-in design. Check the 1-3/4 inch O.D. tube size before mounting, since no other tube diameter is named.

SKU: RFPRH-1021 Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 8.80 × 6.80 × 6.50 in
brands

Questions & Answers

What tube size does the RH-1021 mounting bracket fit?

It mounts to 1-3/4 inch O.D. tubing, the only tube size this bracket is made for. Measure your bar before mounting, and use this bracket only on 1-3/4 inch O.D. tubing.

What thread size does the mounting bracket have?

It has 5/16 x 18 tapered threads in three directions, so you can position a device in more than one orientation on the tube.

Does the bracket fit a specific vehicle?

The bracket is universal fit and names no specific vehicle, so compatibility depends on tube diameter rather than make, model or year. Check that your tubing is 1-3/4 inch O.D. before mounting.

How do I stop a mounted device from rotating?

Tighten the bracket bolts evenly and make sure the bracket sits flat against the tube before the device is attached. Add a light thread locker if the device is heavy and the design allows it. Check the position after rough trails and adjust it as needed.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rock Hard 4X4 Parts Roll Cage on Amazon