Overview
The Rigid Industries RDS-Series 54 inch LED light bar, part 886213, is a hybrid spot light bar rated at 453 Watts and 85538 raw lumens. It is universal fit, so it is not built for one particular vehicle, and it suits off-road vehicles with a mounting location for a 54 inch bar.
The RDS-Series is a curved light bar line. The curve follows the windshield and bumper lines of today’s trucks and SUVs, and it widens the spread of light so one bar lights more of the road ahead. The wider range also includes an updated PRO design with up to 70% more raw lumens, updated branding and blacked-out circuit boards for a more refined look.
A Midnight Optics option is available, a spot optic with a transparent black enamel coating and black oxide hardware. It lets the bar blend into the vehicle during the day while still lighting the night, and it is offered across the E-Series, RDS-Series and D-Series lines.
Key features
- Hybrid spot beam from 108 white LEDs
- 453 Watts and 85538 raw lumens
- IP-68 certified for water and dust intrusion
- Certified to MIL-STD-810G for shock and vibration
- Unbreakable polycarbonate lens
- UV and abrasion resistant powder coat finish
- Custom two-bolt mounting system for adjustability and strength
- Midnight Optics option with black oxide hardware
Choosing a mounting spot
A 54 inch bar is long enough that the mounting spot decides how well it performs and how well it survives. Look for a flat, rigid section of bumper or bar with clear space in front, and avoid spots where the bar would sit in the path of branches or wind-blown debris. The bar should also leave room for the hood to open and for a driver to see the road ahead.
Long bars put more leverage on their mounts, so plan for the load on the bolts and the surface they bite into. Mount the bar level, and recheck it after rough trail use. A fused, switched power feed protects the wiring from the stress of vibration and road spray.
- Measure the mounting space before ordering
- Keep the bar clear of the hood’s swing path
- Route wiring away from moving parts
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 886213 |
| UPC | 849774030109 |
| Length | 54 inch |
| Beam pattern | Hybrid spot |
| Power | 453 Watts |
| LEDs | 108 white LEDs |
| Output | 85538 raw lumens |
| Lens | Unbreakable polycarbonate |
| Finish | UV and abrasion resistant powder coat |
| Water and dust rating | IP-68 certified |
| Shock and vibration | MIL-STD-810G certified |
| Mounting | Custom two-bolt system |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, and no year, make or model applies. Fit depends on where the bar can be mounted, so measure the 54 inch length and the mounting space before choosing a location.
No vehicle-specific fitment applies to this bar. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bar uses a custom two-bolt mounting system. Plan a fused power connection and check local rules for driving with auxiliary lights before you wire it.
What’s included
Check the package contents before ordering or wiring, since accessories may be sold separately.
Not included: If your installation needs a wiring harness or switch, plan to source them separately.









