Overview
The RIGID RDS-Series 40 inch LED light bar, model 884213, is a 40 inch hybrid spot light bar rated at 314 watts with 80 white LEDs. It is universal fit rather than built for a specific vehicle, so the installer chooses the mounting position.
The RDS-Series PRO uses a gently arced housing to suit the curved windshields and bumpers on today’s trucks and SUVs, and the arc spreads light more widely from a single bar. The PRO line offers up to 70% more raw lumens. This bar is rated at 63360 raw lumens. Its polycarbonate lens and powder coat are built for rough use, and it is certified to MIL-STD-810G for shock and vibration.
Rigid also makes Midnight Optics, a transparent black enamel spot optic with black oxide hardware, offered in its E-Series, RDS-Series and D-Series lines. Confirm the optic finish for this model before choosing one.
Key features
- Hybrid spot beam pattern
- 80 white LEDs rated at 314 watts
- 63360 raw lumens
- Certified to MIL-STD-810G for shock and vibration
- Unbreakable polycarbonate lens
- UV and abrasion resistant powder coat finish
- Custom two-bolt mounting system for adjustability and strength
Choosing a mounting spot
A 40 inch bar puts a lot of weight and wind load on its mount, so the spot you choose matters as much as the light itself. Look for a section of bumper, grille or bar that is flat enough to seat both brackets fully and far enough from the radiator and engine heat. Measure the length against the space before drilling anything.
Wiring a bar this size calls for a fused feed, a relay and a switch, which keeps current away from the factory switch circuits. Route the harness away from moving suspension parts and sharp edges, and use weatherproof connectors at every join. Over time, check the bolts and bracket for loosening, since vibration on rough tracks is the most common cause of a shifting bar.
- Confirm the bracket seats flat on the mount
- Use a fused feed and a relay
- Re-check two-bolt fasteners after rough trails
Specifications
| Brand | Rigid Industries |
|---|---|
| Model | 884213 |
| UPC | 849774030086 |
| Series | RDS-Series |
| Length | 40 in. |
| Light type | LED |
| LED count | 80 white |
| Power | 314 Watts |
| Raw lumens | 63360 |
| Beam | Hybrid spot |
| Lens | Polycarbonate, unbreakable, clear |
| Finish | Black, UV and abrasion resistant powder coat |
| Certification | MIL-STD-810G, shock and vibration |
| Mounting | Bracket, single; two-bolt system |
| Fitment | Universal fit |
Vehicle fitment
This bar is universal fit and is not vehicle-specific. Mounting depends on the bumper, grille or bar you use, so match the 40 inch length and the two-bolt mounting system to a secure, unobstructed location.
No vehicle list applies to universal fit light bars. Confirm your mounting location and wiring before ordering.
Installation notes
The two-bolt mount is adjustable, so set the aim once the bar is secured. At 314 watts, wire the bar through a fuse and a relay with a switch, and check local road-use rules for auxiliary lights before mounting it on a street-driven vehicle.
What’s included
Check the packaging against your installation before starting, including hardware and wiring.









