Overview
The JW Speaker TS3001V LED Auxiliary Light, part number 550673, is a 7 inch by 5 inch oval off-road light with LED bulbs and a clear lens. JW Speaker designs it for rugged off-road use, and it is a lighting accessory rather than a vehicle-specific part.
The TS3001V has an impact-resistant Xenoy housing and LEDs that JW Speaker says resist shock and vibration. Its improved mounting design is meant to simplify installation and give flexibility when mounting the light on Jeep A-pillars, front bumpers and rooftop brackets.
Key features
- Oval light, 7 inch by 5 inch
- Impact-resistant Xenoy housing
- LEDs that resist shock and vibration.
- Improved bracket mounting design
- Clear lens
Choosing a mounting point
An auxiliary light’s usefulness depends on where it sits. A-pillar mounts put the beam high and forward, which suits trail lighting. Front bumper mounts sit closer to the ground and help with low obstacles. Rooftop brackets give the highest view but add height that affects wind noise and the load on the roof.
Each mounting option needs a bracket or base that suits both the light and the vehicle. Check the structure at the mounting point, because a solid frame reduces vibration. Keep the light clear of the windshield wiper arc, the hood latch and any hinge or steering component that moves.
- Compare beam height across A-pillar, bumper and roof mounts
- Check bracket strength at the mounting point
- Keep the light out of wiper and hinge sweep
- Re-tighten brackets after rough trails
Specifications
| Brand | JW Speaker |
|---|---|
| Part number | 550673 |
| Model | TS3001V |
| Light shape | Oval |
| Size | 7 inch x 5 inch |
| Bulb type | LED |
| Lens color | Clear |
| Mounting location | Bracket |
| Housing | Impact-resistant Xenoy |
Vehicle fitment
This is a universal lighting accessory, so it is not tied to a specific vehicle, year or model. The bracket and the place you mount it are what decide the fit, so check that the chosen mounting point has room for the light.
The mounting points named by JW Speaker are A-pillars, front bumpers and rooftop brackets, and each needs its own bracket or base. Confirm your vehicle’s year, model and trim before ordering any mount.
Installation notes
Wire the light through a fuse and a relay so the switch does not carry the full load, and keep the wiring away from moving parts. Check local road-use rules for auxiliary lights before driving with them on.
What’s included
One TS3001V LED auxiliary light with its bracket mounting, shown as a kit.











