Overview
The Rigid Industries A-Series Low Power LED Light in neutral white, part number 480023, is an accessory light that Rigid describes as usable almost anywhere. It suits vehicle cabs, boat cabins, work vehicle beds, the area under a hood and trunks, where it lights otherwise dark spaces.
The A-Series has a compact aluminum housing that is lightweight and waterproof. It comes in several LED colors and in high and low power versions. This is the low power version.
Key features
- Compact aluminum housing
- Lightweight and waterproof
- Rubber flat mount and 3M VHB two-way pad for flat mounting
- Radius tube-mount adapters with side or bottom wire exits
- Neutral white LED
Choosing a mounting method
A flat mount suits a clean, level surface where the light can sit close to the panel. The 3M VHB pad bonds firmly, so the mounting surface needs to be free of dust, oil and old adhesive before the light goes on. Test-fit the position first, since a bonded pad is hard to move without leaving residue. Tube-mount adapters suit spots where the light needs to be angled or raised off a flat surface, such as a bar, a roll cage tube or a bed rail.
Wire exit choice is worth planning before drilling or routing. A side exit can tidy a cab or cabin install, while a bottom exit may suit a light set under a hood or in a trunk. Keep cable runs away from moving parts, sharp edges and heat sources, and use grommets where wires pass through metal. Inspect the mount and the lens every few months, especially after rough use or washing, and re-check the adhesive if the light starts to move.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 480023 |
| Series | A-Series Low Power |
| Light color | Neutral white |
| Housing | Compact aluminum |
| Mounting options | Rubber flat mount, 3M VHB two-way pad, radius tube-mount adapter |
| Wire exits | Side or bottom, with the tube-mount adapters |
| Power | Low power version |
Vehicle fitment
This is a universal accessory light, not designed for one vehicle, year or model. Choose the mounting surface and wire exit that suits the spot, since the light can go in a cab, bed, under a hood or in a trunk.
Confirm your vehicle’s year, model and trim before ordering any mount.
Installation notes
The 3M VHB pad is a strong adhesive mount, so clean and dry the surface before pressing the light on. Run the wiring through a fused circuit and check local rules on interior and exterior lighting before using it on the road.
What’s included
One A-Series Low Power neutral white LED light, with a rubber flat mount, a 3M VHB two-way pad and radius tube-mount adapters.









