Select your vehicle

Rigid Industries 1M Extension Add A Light – 40198

Rigid Industries

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Universal fit 1M Add-a-Light harness extension, Rigid Industries part number 40198
  • 12 AWG wire and Deutsch DTP connector
  • Designed for E-Series 40 inches and longer and RDS-Series 30 inches

Description

Overview

The Rigid Industries 40198 is a 1M Add-a-Light harness extension with 12 AWG wire and a Deutsch DTP connector. It adds 1 meter of length for E-Series lights 40 inches and longer and RDS-Series lights 30 inches.

The extension is matched to Rigid Industries light series, not to a vehicle, so it is universal fit. Confirm the connector and series before installing.

Key features

  • 1 meter of additional length
  • 12 AWG wire
  • Deutsch DTP connector
  • Designed for E-Series 40 inches and longer
  • Designed for RDS-Series 30 inches

Choosing extension length

A harness extension adds length between a light and its power source, which helps when the light is mounted farther from the original harness end than the stock wire reaches. Measure the route from the light to the connection point before ordering, and allow some slack so the wire is not pulled tight when the suspension flexes or the light is aimed.

Longer runs carry more resistance, which can reduce the power reaching the light. Keep the total run as short as the mounting position allows, and use a fused, properly sized feed at the power source. Route the wire away from moving parts, sharp edges and hot exhaust components, and secure it with clips at regular intervals.

  • Keep connectors dry and sealed
  • Re-check the DTP connector after first trail runs
  • Use loom or split conduit on exposed sections

Specifications

Brand Rigid Industries
Part number 40198
UPC 815711013023
Added length 1 meter
Wire gauge 12 AWG
Connector Deutsch DTP
Compatible series E-Series 40 inches and longer; RDS-Series 30 inches

Vehicle fitment

This extension is universal fit and is not vehicle-specific. Fit depends on the Rigid Industries light series and connector.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check that the DTP connector on your light matches before connecting the extension.

What’s included

The package is a 1M harness extension.

Not included: the light and its original harness.

SKU: RIG40198 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 12.00 × 3.00 × 3.00 in
brands

Questions & Answers

What is the Rigid Industries 40198?

It is a 1M Add-a-Light harness extension, part number 40198, that adds 1 meter of wire length. It features 12 AWG wire and a Deutsch DTP connector and is designed for specific E-Series and RDS-Series lights.

Which Rigid lights does the 40198 work with?

It is designed for E-Series products 40 inches and longer and RDS-Series products 30 inches. Match your light's series and connector to those sizes before installing the extension on any light.

Is the 40198 extension vehicle specific?

No. It is a universal fit extension, so fit depends on the Rigid Industries light series and connector rather than on your vehicle. Confirm the series and connector of your light before ordering.

Can a harness extension reduce light output?

Yes, a longer run adds resistance, which can lower the voltage reaching the light. Keep the route as short as practical, use a properly rated fuse at the power source, and check connections for corrosion if the light seems dimmer than before.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon