Overview
The SR-L Series flush mount spreader light with white halo, part number 53220, is a flush mounted area light. Its broad 120-degree beam lights wide areas around a vehicle, and the white halo backlight adds a finished accent.
This light is rated at 14 watts and 1452 lumens. It has a maximum voltage of 36 and an amp draw of 1. It reads 8.40 lux at 10 m, with beam distances of 57.90 at 0.25 lux and 29 at 1 lux, and it has a spread beam pattern.
A white halo keeps the accent neutral on any color of vehicle, which suits a clean, neutral look.
The white halo is one of four halo colors Rigid offers for this series.
Key features
- 120-degree horizontal beam
- White halo backlight
- Flush mount
- Spread beam pattern
- Impact resistant polycarbonate lens over a high-grade aluminum housing
Flush mount installation
Flush mounting gives a clean, low profile look, but it depends on a well-made opening and enough room behind the surface. Mark the cutout carefully and check that the housing and leads fit before committing. A flush light sits level with the panel, so the surface should be sound and free of cracks where the housing is secured.
A white halo is a neutral accent that blends with most body colors. Like any accent light, it works best when the main beam is aimed well and the halo is not left on in traffic. Keep the leads clear of moving parts and heat, and route them so they do not pull on the connections. Inspect the lens seal and mounting screws after rough outings, and re-seal if water has been getting in.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 53220 |
| Series | SR-L Series Spreader, flush mount |
| Halo color | White |
| Mounting location | Flush |
| Bulb type | LED |
| Watts | 14 |
| Lumens | 1452 |
| Horizontal beam angle | 120 degrees |
| Beam pattern | Spread |
| Lux at 10 m | 8.40 |
| Beam distance at 0.25 lux | 57.90 |
| Beam distance at 1 lux | 29 |
| Voltage max | 36 volts |
| Amp draw | 1 amp |
| Quantity | Single light |
Vehicle fitment
This universal accessory light is not tied to one vehicle, year or model. The fit depends on the flush mounting spot, so check that the cutout and the leads suit the surface you choose.
Confirm your vehicle’s year, model and trim before ordering any bracket or harness.
Installation notes
Flush mounts sit level with the surface, so check the mounting opening before cutting or drilling anything. The flying leads are the wiring route for this light, or the RIGID wiring harness, part 40300, can be fitted instead. Fuse the power at the power supply and check local rules on accent and area lighting before use on public roads.
What’s included
One SR-L Series flush mount spreader light with white halo and flying leads.
Not included: the RIGID wiring harness, part 40300.













